VTech DS6151 user manual Key tone Set date/time Home area code

Page 22

Telephone base settings

Home area code

If you dial local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log.

To change the setting:

1.Press the MENU softkey when the telephone base is not in use.

2.Press /CID or /DIR to select Settings, then press the SELECT softkey.

3.Press /CID or /DIR to select Home area code, then press the SELECT softkey.

4.Use the dialing keys (0-9) to enter the desired home area code. Press CANCEL to delete a digit.

5.Press the SET softkey to confirm or press the BACK softkey to exit to the previous menu.

If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed following the steps above. After you delete the home area code, _ _ _ appears in the display.

Intercom

Ringers

Settings

SELECT

Key tone

Set date/time Home area code

SELECT

HOME AREA CODE

___

BACK SET

Dial mode

The dial mode is preset to tone. If you do not have touch tone service, you need to change the setting to pulse.

To change the setting:

1.Press the MENU softkey when the telephone base is not in use.

2.Press /CID or /DIR to select Settings, then press the SELECT softkey.

3.Press /CID or /DIR to select Dial mode, then press the SELECT softkey.

4.Press /CID or /DIR to choose Tone or Pulse. Press the SET softkey to save or press CANCEL to exit to the previous menu.

Intercom

Ringers

Settings

SELECT

Set date/time Home area code Dial mode

SELECT

DIAL MODE

Tone Pulse

SET

18

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User’s manual Congratulations Table of contents Appendix Answering system operation..60Index Parts checklist Getting startedTelephone base installation Figure One Installation with 2-line jackFigure Two Installation with separate line jacks Battery installation Charge lightBattery charging ChargerHandset layout SoftkeysHold Cancel Telephone base layoutRepeat Hold LCD language Handset settingsSettings To select a languageClear voicemail indicator To manually turn off these indicatorsKey tone To change the settingsTo adjust the date and time Set date/timeTo change the setting Dial modeHome area code Ringers Ringer volumeTo adjust the handset ringer volume Ringer toneTelephone base settings LCD language Clear voicemail Key tone Clear voicemail Key tone Set date/time Key tone Set date/time Home area code To adjust the ringer volume Answering system set up Answering system settingsAnswer ON/OFF To change the setting Using the telephone base Call screeningAnnouncement Play your announcementDIR to select Mailbox 1 or Mailbox Record your own announcementShows Recording announcement ..., or press Playback at any time 2 to replay the recorded Delete your announcement Number of rings Remote access code Message alert tone Telephone operation Make, answer or end a callHandset speakerphone VolumeCall waiting Silence the ringerMute HoldTo start paging Temporary tone dialingHandset locator To end pagingTo access a number in the call log while on a call To access a number in the directory while on a callChain dialing Review the redial list To access the last number redial while on a callRedial list Dial a redial entrySave a redial entry to the directory Delete a redial entryHandset 11 and Tone 2 for Handset Multiple handset useIntercom To initiate an intercom call with a handsetTo answer an intercom call at the telephone base To initiate an intercom call from the telephone baseTo answer an intercom call at the handset To silence an intercom callAnswer an incoming call during an intercom call Transfer a call From the handsetAt the telephone base Share an outside call Conference line 1 and line 2 callsTo initiate an intercom call while on a conference call To end a conference callTo answer the incoming call while on a conference call Answer an incoming call during a conference callTo end the call while on a conference call Directory Create a new directory entryEnter Number Character chart Alphabetical search To review the directory Using the handsetReview the directory Dial a directory entryEdit a directory entry Edit NameDelete a directory entry To delete an entryStore a speed dial entry Review the speed dial directory Dial a speed dial entryEdit a speed dial entry Delete a speed dial entry Reassign a speed dial entryTo edit an entry About caller ID Information about caller ID with call waitingMissed calls indicator Caller ID historyMemory match Review the call logMake a call log entry ready to dial Dial a call log entrySave a call log entry to the directory Delete from the call log Call log display screen messagesAnswering system and voicemail Answering system operationMessage capacity New message indication Call interceptTo play messages using the handset To play messages using the telephone baseMessage playback To delete all old messages with the telephone base Delete all messagesTo delete all old messages with the handset Record a memo using the handset Record a memo using the telephone baseRecord and play memos Remote access CommandAppendix Screen display messagesThere is no telephone line connected on line Handset lights Handset and telephone base indicatorsTelephone base lights Handset screen icons Telephone base screen icons Battery Battery needs charging whenAdd and register a handset optional Expand your telephone systemTo register a handset To deregister all handsets To resetReplace a handset Deregister all handsets?There is no dial tone TroubleshootingMy telephone does not work at all Cannot dial outTelephone does not ring when there is an incoming call Low battery shows on handset screenCharge light is off My handset beeps and is not performing normally Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy caller ID features are not working properly Registration failed appears on the handsetOut of range or no power at base shows on the handset screen Caller ID entries do not match the numbers I need to dialOutgoing announcement is not clear Cannot retrieve voicemail messagesAnswering system does not record messages Messages on the answering system are incomplete Answering system does not respond to remote commandsMessages on the answering system are very difficult to hear Common cures for electronic equipmentImportant safety instructions Maintenance Precautions for users of implanted cardiac pacemakersOperating range About cordless telephones Rbrc sealWarranty What does this limited warranty cover?How do you get warranty service? FCC, Acta and IC regulations FCC PartIndustry Canada Technical specifications Index Index 91-002462-010-100
Related manuals
Manual 20 pages 30.59 Kb

DS6151 specifications

The VTech DS6151 is a cordless phone system designed to deliver a blend of advanced features, user-friendly design, and reliable performance. This model is particularly popular among consumers looking for a versatile and efficient home communication solution. The DS6151 integrates several technologies and characteristics that enhance its usability.

At the core of the DS6151 is its DECT 6.0 technology, which provides superior sound quality and extended range compared to traditional cordless phones. The Digital Enhanced Cordless Telecommunications (DECT) standard effectively minimizes interference with other wireless devices and ensures secure calls. This technology enhances the phone’s reliability, making it suitable for home environments where multiple wireless devices may be in use.

One of the standout features of the VTech DS6151 is its ability to support multiple handsets. Users can expand their system by adding up to five handsets, allowing for seamless communication throughout the home or office. Each handset is cordless, providing flexibility and convenience, and they communicate with a single base unit, reducing clutter and complexity.

Another key characteristic is the phone's digital answering system. The built-in answering machine can record up to 14 minutes of messages, ensuring that users never miss important calls. The feature is also equipped with a remote access function, allowing users to check messages while away from home.

The DS6151 is designed with user convenience in mind. Its large, backlit LCD display provides clear visibility of caller information and menu options, while the intuitive interface makes it easy for users of all ages to navigate. Additionally, a digital volume control feature allows users to adjust ringer and speaker volume levels for enhanced audio clarity.

The phone's other noteworthy features include caller ID and call waiting capabilities, which help users manage incoming calls effectively. With the power of the caller ID function, users can see the name and number of incoming callers, allowing them to decide whether to pick up or let a call go to voicemail.

Moreover, the VTech DS6151 promotes eco-friendly practices, utilizing energy-efficient technology to reduce power consumption. It comes with a long-lasting rechargeable battery that ensures extended usage between charges, supporting active households.

In summary, the VTech DS6151 is a thoughtfully designed phone system that combines modern technology, practical features, and user-centered design elements. Its DECT 6.0 technology, multi-handset capability, digital answering system, and intuitive interface make it an ideal choice for anyone seeking a reliable and effective communication tool for their home.
Top Page Image Contents