VTech DS6151 user manual Call screening, To change the setting Using the telephone base

Page 25

Answering system settings

Call screening

The call screening feature lets you listen at the telephone base to a caller leaving a message. You can turn this feature on or off with either your handset or telephone base. Unless you change it, the call screening feature is preset to on.

To change the setting:

Using the telephone base:

1.Press the MENU softkey when the telephone base is not in use.

2.Press the SELECT softkey to select Answering sys.

3.Press /CID or /DIR to select Mailbox 1 or Mailbox 2, then press the SELECT softkey. The corresponding icon, 1 or 2, flashes on the screen.

4.Press /CID or /DIR to select Ans sys setup, then press the SELECT softkey.

5.Press the SELECT softkey to select Call screening.

6.Press /CID or /DIR to select On or Off, then press the SET softkey to confirm your setting or press

CANCEL to exit to the previous menu without making any changes.

Using the handset:

1.Press the MENU softkey when the handset is not in use.

2.Press the SELECT softkey to select

ANSWERING SYS.

3.Press or to select Mailbox 1 or Mailbox 2, then press the SELECT softkey. The corresponding icon, 1 or 2, flashes on the screen.

4.Press or to select Ans sys setup, then press the SELECT softkey.

5.Press or to select Call screening, then press the SELECT softkey.

6.Press or to select On or Off, then press the SET softkey to confirm your setting or press the BACK softkey to exit to the previous menu without making any changes.

Answering sys Directory Call log

SELECT

ANSWERING SYS

Mailbox 1

Mailbox 2

SELECT

1

Delete all old Record memo Ans sys setup

SELECT

1

Call screening Announcement

# of rings

SELECT

1

CALL SCREENING

On Off

SET

1

ANS SYS SETUP Answer ON/OFF

Call screening Announcement

BACK SELECT

1

CALL SCREENING

On Off

BACK SET

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents User’s manual Congratulations Table of contents Appendix Answering system operation..60Index Getting started Parts checklistFigure One Installation with 2-line jack Telephone base installationFigure Two Installation with separate line jacks Charge light Battery installationCharger Battery chargingSoftkeys Handset layoutHold Telephone base layout CancelRepeat Hold Settings Handset settingsLCD language To select a languageTo manually turn off these indicators Clear voicemail indicatorTo adjust the date and time To change the settingsKey tone Set date/timeTo change the setting Dial modeHome area code To adjust the handset ringer volume Ringer volumeRingers Ringer toneTelephone base settings LCD language Clear voicemail Key tone Clear voicemail Key tone Set date/time Key tone Set date/time Home area code To adjust the ringer volume Answering system set up Answering system settingsAnswer ON/OFF Call screening To change the setting Using the telephone basePlay your announcement AnnouncementDIR to select Mailbox 1 or Mailbox Record your own announcementShows Recording announcement ..., or press Playback at any time 2 to replay the recorded Delete your announcement Number of rings Remote access code Message alert tone Make, answer or end a call Telephone operationCall waiting VolumeHandset speakerphone Silence the ringerHold MuteHandset locator Temporary tone dialingTo start paging To end pagingTo access a number in the call log while on a call To access a number in the directory while on a callChain dialing Redial list To access the last number redial while on a callReview the redial list Dial a redial entryDelete a redial entry Save a redial entry to the directoryIntercom Multiple handset useHandset 11 and Tone 2 for Handset To initiate an intercom call with a handsetTo answer an intercom call at the handset To initiate an intercom call from the telephone baseTo answer an intercom call at the telephone base To silence an intercom callAnswer an incoming call during an intercom call From the handset Transfer a callAt the telephone base Conference line 1 and line 2 calls Share an outside callTo end a conference call To initiate an intercom call while on a conference callTo answer the incoming call while on a conference call Answer an incoming call during a conference callTo end the call while on a conference call Create a new directory entry DirectoryEnter Number Character chart Review the directory To review the directory Using the handsetAlphabetical search Dial a directory entryEdit Name Edit a directory entryTo delete an entry Delete a directory entryStore a speed dial entry Dial a speed dial entry Review the speed dial directoryEdit a speed dial entry Delete a speed dial entry Reassign a speed dial entryTo edit an entry Information about caller ID with call waiting About caller IDCaller ID history Missed calls indicatorReview the call log Memory matchDial a call log entry Make a call log entry ready to dialSave a call log entry to the directory Call log display screen messages Delete from the call logAnswering system and voicemail Answering system operationMessage capacity Call intercept New message indicationTo play messages using the handset To play messages using the telephone baseMessage playback To delete all old messages with the telephone base Delete all messagesTo delete all old messages with the handset Record a memo using the handset Record a memo using the telephone baseRecord and play memos Command Remote accessScreen display messages AppendixThere is no telephone line connected on line Handset lights Handset and telephone base indicatorsTelephone base lights Handset screen icons Telephone base screen icons Battery needs charging when BatteryAdd and register a handset optional Expand your telephone systemTo register a handset Replace a handset To resetTo deregister all handsets Deregister all handsets?My telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outTelephone does not ring when there is an incoming call Low battery shows on handset screenCharge light is off My handset beeps and is not performing normally My caller ID features are not working properly Hear other calls when using the telephoneHear noise on the cordless handset and the keys do not work Registration failed appears on the handsetCaller ID entries do not match the numbers I need to dial Out of range or no power at base shows on the handset screenOutgoing announcement is not clear Cannot retrieve voicemail messagesAnswering system does not record messages Messages on the answering system are very difficult to hear Answering system does not respond to remote commandsMessages on the answering system are incomplete Common cures for electronic equipmentImportant safety instructions Maintenance Precautions for users of implanted cardiac pacemakersOperating range Rbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specifications Index Index 91-002462-010-100
Related manuals
Manual 20 pages 30.59 Kb

DS6151 specifications

The VTech DS6151 is a cordless phone system designed to deliver a blend of advanced features, user-friendly design, and reliable performance. This model is particularly popular among consumers looking for a versatile and efficient home communication solution. The DS6151 integrates several technologies and characteristics that enhance its usability.

At the core of the DS6151 is its DECT 6.0 technology, which provides superior sound quality and extended range compared to traditional cordless phones. The Digital Enhanced Cordless Telecommunications (DECT) standard effectively minimizes interference with other wireless devices and ensures secure calls. This technology enhances the phone’s reliability, making it suitable for home environments where multiple wireless devices may be in use.

One of the standout features of the VTech DS6151 is its ability to support multiple handsets. Users can expand their system by adding up to five handsets, allowing for seamless communication throughout the home or office. Each handset is cordless, providing flexibility and convenience, and they communicate with a single base unit, reducing clutter and complexity.

Another key characteristic is the phone's digital answering system. The built-in answering machine can record up to 14 minutes of messages, ensuring that users never miss important calls. The feature is also equipped with a remote access function, allowing users to check messages while away from home.

The DS6151 is designed with user convenience in mind. Its large, backlit LCD display provides clear visibility of caller information and menu options, while the intuitive interface makes it easy for users of all ages to navigate. Additionally, a digital volume control feature allows users to adjust ringer and speaker volume levels for enhanced audio clarity.

The phone's other noteworthy features include caller ID and call waiting capabilities, which help users manage incoming calls effectively. With the power of the caller ID function, users can see the name and number of incoming callers, allowing them to decide whether to pick up or let a call go to voicemail.

Moreover, the VTech DS6151 promotes eco-friendly practices, utilizing energy-efficient technology to reduce power consumption. It comes with a long-lasting rechargeable battery that ensures extended usage between charges, supporting active households.

In summary, the VTech DS6151 is a thoughtfully designed phone system that combines modern technology, practical features, and user-centered design elements. Its DECT 6.0 technology, multi-handset capability, digital answering system, and intuitive interface make it an ideal choice for anyone seeking a reliable and effective communication tool for their home.
Top Page Image Contents