VTech DS6151 user manual Battery charging, Charger

Page 9

Getting started

Battery charging

Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base to charge the battery. For best performance, keep the handset in the telephone base when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 71 for battery operating times.

If the screen is blank, you need to charge the handset without interruption for at least 10 minutes to give the handset enough charge to use the telephone for a short time. The handset beeps and shows Low battery. If you are on a call in low battery mode, the handset beeps every minute.

The following table summarizes the battery charge indicators and actions to take.

Battery indicators

Battery status

Action

 

 

 

 

 

 

The screen is blank.

Battery has no charge

Charge without interruption until

 

 

 

 

and the handset cannot

the screen shows Low battery

 

 

 

 

be used.

(at least 10 minutes).

The screen shows

Battery has very little

Charge without interruption until

Place handset

charge and the handset

the screen shows Low battery

in charger and

cannot be used.

(at least four minutes).

 

 

 

flashes.

 

 

 

 

 

 

 

 

The screen shows

Battery has enough

Charge without interruption until

Low battery and

charge to be used for a

the screen shows HANDSET

 

 

 

flashes.

short time.

(at least 30 minutes).

 

 

 

 

 

 

The screen shows

Battery is charged.

To keep the battery charged,

HANDSET.

 

place it in the telephone base

 

 

 

 

 

when not in use.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents User’s manual Congratulations Table of contents Answering system operation..60 AppendixIndex Getting started Parts checklistFigure One Installation with 2-line jack Telephone base installationFigure Two Installation with separate line jacks Charge light Battery installationCharger Battery chargingSoftkeys Handset layoutHold Telephone base layout CancelRepeat Hold Settings Handset settingsLCD language To select a languageTo manually turn off these indicators Clear voicemail indicatorTo adjust the date and time To change the settingsKey tone Set date/timeDial mode To change the settingHome area code To adjust the handset ringer volume Ringer volumeRingers Ringer toneTelephone base settings LCD language Clear voicemail Key tone Clear voicemail Key tone Set date/time Key tone Set date/time Home area code To adjust the ringer volume Answering system settings Answering system set upAnswer ON/OFF Call screening To change the setting Using the telephone basePlay your announcement AnnouncementRecord your own announcement DIR to select Mailbox 1 or MailboxShows Recording announcement ..., or press Playback at any time 2 to replay the recorded Delete your announcement Number of rings Remote access code Message alert tone Make, answer or end a call Telephone operationCall waiting VolumeHandset speakerphone Silence the ringerHold MuteHandset locator Temporary tone dialingTo start paging To end pagingTo access a number in the directory while on a call To access a number in the call log while on a callChain dialing Redial list To access the last number redial while on a callReview the redial list Dial a redial entryDelete a redial entry Save a redial entry to the directoryIntercom Multiple handset useHandset 11 and Tone 2 for Handset To initiate an intercom call with a handsetTo answer an intercom call at the handset To initiate an intercom call from the telephone baseTo answer an intercom call at the telephone base To silence an intercom callAnswer an incoming call during an intercom call From the handset Transfer a callAt the telephone base Conference line 1 and line 2 calls Share an outside callTo end a conference call To initiate an intercom call while on a conference callAnswer an incoming call during a conference call To answer the incoming call while on a conference callTo end the call while on a conference call Create a new directory entry DirectoryEnter Number Character chart Review the directory To review the directory Using the handsetAlphabetical search Dial a directory entryEdit Name Edit a directory entryTo delete an entry Delete a directory entryStore a speed dial entry Dial a speed dial entry Review the speed dial directoryEdit a speed dial entry Reassign a speed dial entry Delete a speed dial entryTo edit an entry Information about caller ID with call waiting About caller IDCaller ID history Missed calls indicatorReview the call log Memory matchDial a call log entry Make a call log entry ready to dialSave a call log entry to the directory Call log display screen messages Delete from the call logAnswering system operation Answering system and voicemailMessage capacity Call intercept New message indicationTo play messages using the telephone base To play messages using the handsetMessage playback Delete all messages To delete all old messages with the telephone baseTo delete all old messages with the handset Record a memo using the telephone base Record a memo using the handsetRecord and play memos Command Remote accessScreen display messages AppendixThere is no telephone line connected on line Handset and telephone base indicators Handset lightsTelephone base lights Handset screen icons Telephone base screen icons Battery needs charging when BatteryExpand your telephone system Add and register a handset optionalTo register a handset Replace a handset To resetTo deregister all handsets Deregister all handsets?My telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outLow battery shows on handset screen Telephone does not ring when there is an incoming callCharge light is off My handset beeps and is not performing normally My caller ID features are not working properly Hear other calls when using the telephoneHear noise on the cordless handset and the keys do not work Registration failed appears on the handsetCaller ID entries do not match the numbers I need to dial Out of range or no power at base shows on the handset screenCannot retrieve voicemail messages Outgoing announcement is not clearAnswering system does not record messages Messages on the answering system are very difficult to hear Answering system does not respond to remote commandsMessages on the answering system are incomplete Common cures for electronic equipmentImportant safety instructions Precautions for users of implanted cardiac pacemakers MaintenanceOperating range Rbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specifications Index Index 91-002462-010-100
Related manuals
Manual 20 pages 30.59 Kb

DS6151 specifications

The VTech DS6151 is a cordless phone system designed to deliver a blend of advanced features, user-friendly design, and reliable performance. This model is particularly popular among consumers looking for a versatile and efficient home communication solution. The DS6151 integrates several technologies and characteristics that enhance its usability.

At the core of the DS6151 is its DECT 6.0 technology, which provides superior sound quality and extended range compared to traditional cordless phones. The Digital Enhanced Cordless Telecommunications (DECT) standard effectively minimizes interference with other wireless devices and ensures secure calls. This technology enhances the phone’s reliability, making it suitable for home environments where multiple wireless devices may be in use.

One of the standout features of the VTech DS6151 is its ability to support multiple handsets. Users can expand their system by adding up to five handsets, allowing for seamless communication throughout the home or office. Each handset is cordless, providing flexibility and convenience, and they communicate with a single base unit, reducing clutter and complexity.

Another key characteristic is the phone's digital answering system. The built-in answering machine can record up to 14 minutes of messages, ensuring that users never miss important calls. The feature is also equipped with a remote access function, allowing users to check messages while away from home.

The DS6151 is designed with user convenience in mind. Its large, backlit LCD display provides clear visibility of caller information and menu options, while the intuitive interface makes it easy for users of all ages to navigate. Additionally, a digital volume control feature allows users to adjust ringer and speaker volume levels for enhanced audio clarity.

The phone's other noteworthy features include caller ID and call waiting capabilities, which help users manage incoming calls effectively. With the power of the caller ID function, users can see the name and number of incoming callers, allowing them to decide whether to pick up or let a call go to voicemail.

Moreover, the VTech DS6151 promotes eco-friendly practices, utilizing energy-efficient technology to reduce power consumption. It comes with a long-lasting rechargeable battery that ensures extended usage between charges, supporting active households.

In summary, the VTech DS6151 is a thoughtfully designed phone system that combines modern technology, practical features, and user-centered design elements. Its DECT 6.0 technology, multi-handset capability, digital answering system, and intuitive interface make it an ideal choice for anyone seeking a reliable and effective communication tool for their home.
Top Page Image Contents