Telephone operation
Temporary tone dialing
The dial mode is preset to tone. If you do not have touch tone service, you need to change the setting to pulse (page 13 and 18).
If you have pulse (rotary) service, you can change from pulse to tone dialing during a call by pressing TONE on the handset or telephone
base. This is useful if you need to send touch tone signals to access telephone banking or long
distance services.
Once you have initiated your call by dialing the
phone number in pulse (rotary), press TONE on the handset or telephone base. Now, all
subsequent key presses will be sent as touch tone signals.
After you hang up the call, the phone returns to pulse (rotary) dialing for the next call.
Handset locator
This feature helps you find a misplaced handset.
To start paging:
1.Press the MENU softkey when the telephone base is not in use.
Call log Page all HS Intercom
SELECT
2.Press /CID or /DIR to select Page all HS, then press the SELECT softkey on the telephone base. The telephone base shows Paging all handsets and the handset shows **Paging**.
To end paging:
•Press the STOP softkey on the telephone base.
•Press OFF, , , , INT, /CID, /DIR, REDIAL/PAUSE, HOLD or any dialing keys
32