Motorola rdm2080d, RDM2020 manual Radio, Battery Features, About the Li-Ion Battery

Page 17

BATTERY FEATURES

The RDM Series MURS Two-Way Radio provides Lithium-Ion batteries that come in different capacities that will define the battery life. It also offers the option to use Alkaline batteries.

About the Li-Ion Battery

The RDM Series MURS Two-Way Radio comes equipped with a rechargeable Li-Ion battery. This battery should be charged before initial use to ensure optimum capacity and performance.

Motorola batteries are designed specifically to be used with a Motorola charger and vice versa. Charging in non-Motorola equipment may lead to battery damage and void the battery warranty. The battery should be at about 77 °F (25 °C) (room temperature), whenever possible. Charging a cold battery (below 50 ° F [10 °C]) may result in leakage of electrolyte and ultimately in failure of the

battery. Charging a hot battery (above 95 °F [35 °C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-sensing circuit to ensure that batteries are charged within the temperature limits stated above.

Battery Recycling and Disposal

 

 

 

Li-Ion rechargeable batteries can be recycled.

 

However, recycling facilities may not be

 

 

 

available in all areas. Under various U.S. state

 

laws and the laws of several other countries,

 

 

 

batteries must be recycled and cannot be

 

 

 

disposed of in landfills or incinerators. Contact

 

RADIO

your local waste management agency for

 

 

specific requirements and information in your

 

 

area. Motorola fully endorses and encourages

 

the recycling of Li-Ion batteries. In the U.S. and

 

OVERVIEW

 

 

Canada, Motorola participates in the

 

 

 

nationwide Rechargeable Battery Recycling

 

 

 

Corporation (RBRC) program for Li-Ion battery

 

 

collection and recycling.

 

 

 

9

 

 

 

 

 

 

 

 

 

English

 

 

 

 

 

 

 

 

 

Image 17
Contents RDM Series Murs Two-Way Radios Page Contents Advanced Configuration Iii English Safety SafetyBatteries Chargers Safety Information Operational Safety Guidelines Batteries and Chargers Safety InformationIntroduction Package ContentsIntroduction Canada TelephoneUSA FCC Licensing Information Regulation on Murs MULTI-USE Radio Service FrequenciesDisplay Model RDM2080d Radio OverviewRadio Overview NON-DISPLAY Model RDM2020 Accessory Connector On/Off/Volume KnobLED Indicator Channel Selector KnobScramble Configurable ButtonsIcon Symbol Comments Icons Chart RDM2080d ModelAbout the Li-Ion Battery Battery FeaturesBattery Recycling and Disposal RadioDROP-IN Tray Charger and Power Supply BatteryRemoving the Battery Installing the BatteryOverview RadioAlkaline Battery Pack Optional Installing Alkaline Batteries Li-Ion Battery Life Alkaline Battery Life Battery Meter RDM2080d Model Charging The Battery Attached to the Radio Charging the BatteryCharging a Standard Battery Charging a Standalone BatteryCharging a High Capacity or Ultra High Capacity Battery Standard Charger LED Indicator Drop-in Tray Charger LED IndicatorsRapid Charger LED Indicator Estimated Charging Time Charging Battery Type SolutionMUC LED Indicator Charging Batteries using a Multi Unit Charger- MUC OptionalBelt Clip Tab Spring Action Belt Installing Spring Action Belt ClipGetting Started Adjusting VolumeGetting Started Turning Radio ON/OFFTalking and Monitoring Selecting a ChannelReceiving a Call ScanWhile receiving, the radio displays the strength Signal Strength and Channel Busy Indicators RDM2080d ModelTalk Range LOW Battery AlertComputer Programming Software Transmit Time-Out TimerPL Reverse Burst Alternate Battery SelectionCloning with a Multi-Unit Charger MUC Radio CloningBasic Configuration Basic ConfigurationBattery Save Menu Options RDM2080d ModelChannel Alias RDM2080d Model Battery Type Settings RDM2080d ModelCloning Mode Keypad Beep RDM2080d Model Roger Beep Tone END of Transmission ToneVOX Voice Operated Transmit Keypad LOCK/UNLOCK RDM2080d ModelTransmit RDM2080d Model VOX/IVOX Sensitivity Settings RDM2080d ModelIvox Internal Voice Operated Nuisance Channel Delete IvoxPL Defeat Reset to Factory DefaultsAdvanced Configuration Advanced ConfigurationAdvanced Configuration Advanced Configuration RDM2080d ModelMicrophone Gain Level Other Advanced Configurations RDM2080d Model only Call ToneScramble To configure Accessory Microphone GainSide Button Preset to Channel Select CTCSS/DPL Advanced Configuration RDM2020 ModelNumber Confirmation Beep LED Indication Reading Values Through Beeps and LED IndicatorsReading CTCSS/DPL Values Reading Frequency ValuesChanging Values Reading Auto-Scan ValuesConfiguring a Code Configuring a FrequencyConfiguring Auto-Scan RDM Series Murs Frequency Chart Frequency and Code ChartsFrequency and Code Charts RDM2020 Murs Non-Display Model Default Frequencies and Codes Ctcss Codes Frequency and Code Charts Ctcss and PL/DPL CodesPL/DPL Codes 654 129 Customized PL 445 112 662 130 139 190 USE and Care USE and CareTroubleshooting TroubleshootingRange. Check for clear line of sight to improve transmission Radios are too close they must be at least five feet apart VOX feature might be set to OFF Motorola Limited Warranty forUnited States CanadaExclusions WarrantySoftware HOW to Obtain Warranty Service or Other INFORMATION?WHO is COVERED? Software Copyright NoticeExport LAW Assurances Patent NoticeAccessories AccessoriesAudio Accessories BatteryPower Supplies Power Supplies AC PIN AdaptorsSoftware Applications CablesAccessories Page 68012002002
Related manuals
Manual 2 pages 27.9 Kb