OTHER ADVANCED CONFIGURATIONS (RDM2080d MODEL ONLY)
Call Tone
This feature sends an alert notification to other radios in the fleet prior to the transmission with the intent to grab the receiver’s attention so the transmission is not missed.
In order to configure this feature via the front panel, it must first be enabled via the CPS.
To configure call tones:
1. | Enter “Advanced Configuration Mode” and | ||
| scroll through the menu options until the screen | ||
| shows the image below: | ||
| TONE |
| |
| The current call tone setting will be blinking. A | ||
| call tone value (0,1,2 or 3) must be selected by | ||
| pressing the | / | buttons. The call tone will |
| |||
2.Long press the PTT button to save and exit,
the next feature without saving.
Microphone Gain Level
The sensitivity of the microphone can be adjusted in both the radio’s microphone and the accessory’s microphone to fit different users or operating environments.
The Gain determines the microphone’s transmitted audio volume level for the receiving radio’s speaker.
To configure microphone gain level:
1. | Enter “Advanced Configuration Mode” and |
|
| scroll through the options by short pressing the |
|
| PTT button until the screen shows the image | ADVANCED CONFIGURATION |
| The current microphone gain level setting will | |
| below: |
|
| IMIC |
|
| blink. |
|
41 English