Motorola rdm2080d, RDM2020 manual Side Button Preset to Channel Select

2.Scroll up/down through the configuring options by short pressing the PTT button, until the screen shows the image below:

The current scramble setting will blink.

3.Select the desired scramble value (0,1,2 or 3) by pressing the / buttons.

4.Long press the PTT button to save and exit, --or-- short press the PTT button to configure the next feature without saving.

Side Button Preset to Channel Select

Any channel can be mapped to either button B or C as a preset channel.

To map a channel to a side button:

1.Enter “Advanced Configuration Mode” and choose the channel to be preset using the

/ buttons.

2.Press and hold the B or C button

for 2 to 3 seconds. A short press of either preset button (B and C) will play a good key chirp.

Note: When scanning, a short press of either preset button will change the home channel to the preset channel. The display will show FREQ/PL and will continue to scan from the new home channel.

ADVANCED CONFIGURATION

43English