4.Use button B to move the cursor to the left.
5.When the cursor is located in the first character, the radio produces a bonk tone.
6.Use the 
/
buttons to change the current selected character to the next ASCII value in alphabetical order (from A to Z). The characters will be uppercase letters.
To toggle character between uppercase and lower case, press the A button. The supported lower case characters are:
b, c, d, g, h, i, l, o, r, u.
To insert special characters press the C button.The supported special characters and numbers are shown in the following order: 0 - 9
*{}? &%. + / - _ ' ' \. Character (' ') is a used for blank spaces.
Note: If the radio is left idle for more than 3 seconds, the current character will be accepted and the cursor will advance one space to the right.
7.Long press the PTT button to save and go back to the “Channel Aliasing Selection Mode” to edit other channel alias name,
Turn OFF the radio to exit without saving changes.
Notes: If the channel alias name is left blank, the radio will play a bad key chirp and will stay in the editing menu mode until the channel name is edited and saved.
To exit Channel Aliasing Mode, long press the PTT button.
CLONING MODE
Enables radio to enter cloning mode in order to clone its profile settings into other radios (using the Radio to Radio Cloning Cable or
BASIC CONFIGURATION
33English