Motorola RDM2020, rdm2080d manual Ivox Internal Voice Operated, Transmit RDM2080d Model

Page 44
iVOX operation can be temporarily disabled by pressing the PTT button while the radio is ON.

6.To receive, stop talking.

BASIC CONFIGURATION

 

VOX

 

Accessory

 

 

 

 

Accessory

 

 

Connector

 

Note:

VOX can be temporarily disabled by

 

 

pressing the PTT button or removing the

 

 

audio accessory.

 

IVOX - INTERNAL VOICE OPERATED

 

TRANSMIT (RDM2080d MODEL)

Enables the radio to automatically transmit due to recognition of voice without the use of audio accessories. The radio automatically stops transmitting when audio is no longer present.

To enable iVOX on the radio:

English 36

1.Press and hold the PTT button while turning the

radio ON. The display will show the icon.

2.To transmit, talk directly into the microphone without pressing the PTT button. There is a short threshold in the transmission that can be adjusted by changing the iVOX level in the CPS.

3.Turn OFF the radio to disable iVOX.

Note:

VOX/IVOX SENSITIVITY SETTINGS (RDM2080d MODEL)

Before changing VOX sensitivity settings, this feature must be configured via the CPS and an audio accessory must be connected to the radio. Before configuring iVOX sensitivity, the iVOX feature must have been enabled by pressing the PTT button while powering up the radio. The default sensitivity value for VOX is

Image 44
Contents RDM Series Murs Two-Way Radios Page Contents Advanced Configuration Iii English Safety SafetyBatteries Chargers Safety Information Batteries and Chargers Safety Information Operational Safety GuidelinesIntroduction Package ContentsIntroduction Canada TelephoneUSA Regulation on Murs MULTI-USE Radio Service Frequencies FCC Licensing InformationDisplay Model RDM2080d Radio OverviewRadio Overview NON-DISPLAY Model RDM2020 On/Off/Volume Knob Accessory ConnectorLED Indicator Channel Selector KnobConfigurable Buttons ScrambleIcons Chart RDM2080d Model Icon Symbol CommentsBattery Features About the Li-Ion BatteryBattery Recycling and Disposal RadioBattery DROP-IN Tray Charger and Power SupplyInstalling the Battery Removing the BatteryOverview RadioAlkaline Battery Pack Optional Installing Alkaline Batteries Li-Ion Battery Life Alkaline Battery Life Battery Meter RDM2080d Model Charging the Battery Charging The Battery Attached to the RadioCharging a Standalone Battery Charging a Standard BatteryCharging a High Capacity or Ultra High Capacity Battery Drop-in Tray Charger LED Indicators Standard Charger LED IndicatorRapid Charger LED Indicator Charging Battery Type Solution Estimated Charging TimeCharging Batteries using a Multi Unit Charger- MUC Optional MUC LED IndicatorInstalling Spring Action Belt Clip Belt Clip Tab Spring Action BeltAdjusting Volume Getting StartedGetting Started Turning Radio ON/OFFSelecting a Channel Talking and MonitoringReceiving a Call ScanSignal Strength and Channel Busy Indicators RDM2080d Model While receiving, the radio displays the strengthLOW Battery Alert Talk RangeTransmit Time-Out Timer Computer Programming SoftwareAlternate Battery Selection PL Reverse BurstRadio Cloning Cloning with a Multi-Unit Charger MUCBasic Configuration Basic ConfigurationBattery Save Menu Options RDM2080d ModelBattery Type Settings RDM2080d Model Channel Alias RDM2080d ModelCloning Mode Roger Beep Tone END of Transmission Tone Keypad Beep RDM2080d ModelKeypad LOCK/UNLOCK RDM2080d Model VOX Voice Operated TransmitTransmit RDM2080d Model VOX/IVOX Sensitivity Settings RDM2080d ModelIvox Internal Voice Operated Ivox Nuisance Channel DeleteReset to Factory Defaults PL DefeatAdvanced Configuration Advanced ConfigurationAdvanced Configuration RDM2080d Model Advanced ConfigurationOther Advanced Configurations RDM2080d Model only Call Tone Microphone Gain LevelTo configure Accessory Microphone Gain ScrambleSide Button Preset to Channel Select Advanced Configuration RDM2020 Model CTCSS/DPLReading Values Through Beeps and LED Indicators Number Confirmation Beep LED IndicationReading Frequency Values Reading CTCSS/DPL ValuesReading Auto-Scan Values Changing ValuesConfiguring a Frequency Configuring a CodeConfiguring Auto-Scan RDM Series Murs Frequency Chart Frequency and Code ChartsFrequency and Code Charts RDM2020 Murs Non-Display Model Default Frequencies and Codes Frequency and Code Charts Ctcss and PL/DPL Codes Ctcss CodesPL/DPL Codes 654 129 Customized PL 445 112 662 130 139 190 USE and Care USE and CareTroubleshooting TroubleshootingRange. Check for clear line of sight to improve transmission Radios are too close they must be at least five feet apart VOX feature might be set to OFF Warranty for Motorola LimitedUnited States CanadaWarranty ExclusionsHOW to Obtain Warranty Service or Other INFORMATION? SoftwareWHO is COVERED? Software Copyright NoticePatent Notice Export LAW AssurancesAccessories AccessoriesAudio Accessories BatteryPower Supplies AC PIN Adaptors Power SuppliesSoftware Applications CablesAccessories Page 68012002002
Related manuals
Manual 2 pages 27.9 Kb