Motorola rdm2080d, RDM2020 manual Basic Configuration, Menu Options RDM2080d Model, Battery Save

Page 39

BASIC CONFIGURATION

MENU OPTIONS (RDM2080d MODEL)

The menu options only activate whenever there is an audio accessory connected to the radio, iVOX is enabled and/or a battery type has been changed.

To enter MENU options:

1.Short press the MENU button. The radio will navigate to the first feature option available.

Features can be navigated with the

/

buttons.

 

2.After selecting the desired settings, press MENU to save and go to the next option, or long press the PTT button to save and exit or turn OFF the radio to exit without saving changes.

Note: When there is no activity for more than ten seconds, MENU mode will time out.

BATTERY SAVE

This feature extends the battery life by placing the radio in “Idle” mode each time there is no radio activity. The battery safe feature default setting is set ON.

To toggle Battery Save on/off:

1.Press SB1 and SB2 simultaneously for 2 or 3 seconds while powering up the radio until a quick series of beeps is heard, which indicates that Battery Save mode is ON.

2.Repeat step one until the standard power-up tone is heard, which indicates that Battery Save mode is OFF.

Note: The transmission threshold increases when Battery Save mode is ON. To have a slightly better transmission threshold, set Battery Save mode to OFF so that the radio is always ready to transmit or receive without any delays.

BASIC CONFIGURATION

31English

Image 39
Contents RDM Series Murs Two-Way Radios Page Contents Advanced Configuration Iii English Safety SafetyBatteries Chargers Safety Information Operational Safety Guidelines Batteries and Chargers Safety InformationPackage Contents IntroductionIntroduction Telephone USACanada FCC Licensing Information Regulation on Murs MULTI-USE Radio Service FrequenciesRadio Overview Radio OverviewDisplay Model RDM2080d NON-DISPLAY Model RDM2020 Channel Selector Knob On/Off/Volume KnobAccessory Connector LED IndicatorScramble Configurable ButtonsIcon Symbol Comments Icons Chart RDM2080d ModelRadio Battery FeaturesAbout the Li-Ion Battery Battery Recycling and DisposalDROP-IN Tray Charger and Power Supply BatteryRadio Installing the BatteryRemoving the Battery OverviewAlkaline Battery Pack Optional Installing Alkaline Batteries Li-Ion Battery Life Alkaline Battery Life Battery Meter RDM2080d Model Charging The Battery Attached to the Radio Charging the BatteryCharging a Standard Battery Charging a Standalone BatteryCharging a High Capacity or Ultra High Capacity Battery Standard Charger LED Indicator Drop-in Tray Charger LED IndicatorsRapid Charger LED Indicator Estimated Charging Time Charging Battery Type SolutionMUC LED Indicator Charging Batteries using a Multi Unit Charger- MUC OptionalBelt Clip Tab Spring Action Belt Installing Spring Action Belt ClipTurning Radio ON/OFF Adjusting VolumeGetting Started Getting StartedScan Selecting a ChannelTalking and Monitoring Receiving a CallWhile receiving, the radio displays the strength Signal Strength and Channel Busy Indicators RDM2080d ModelTalk Range LOW Battery AlertComputer Programming Software Transmit Time-Out TimerPL Reverse Burst Alternate Battery SelectionCloning with a Multi-Unit Charger MUC Radio CloningMenu Options RDM2080d Model Basic ConfigurationBasic Configuration Battery SaveChannel Alias RDM2080d Model Battery Type Settings RDM2080d ModelCloning Mode Keypad Beep RDM2080d Model Roger Beep Tone END of Transmission ToneVOX Voice Operated Transmit Keypad LOCK/UNLOCK RDM2080d ModelVOX/IVOX Sensitivity Settings RDM2080d Model Ivox Internal Voice OperatedTransmit RDM2080d Model Nuisance Channel Delete IvoxPL Defeat Reset to Factory DefaultsAdvanced Configuration Advanced ConfigurationAdvanced Configuration Advanced Configuration RDM2080d ModelMicrophone Gain Level Other Advanced Configurations RDM2080d Model only Call ToneScramble To configure Accessory Microphone GainSide Button Preset to Channel Select CTCSS/DPL Advanced Configuration RDM2020 ModelNumber Confirmation Beep LED Indication Reading Values Through Beeps and LED IndicatorsReading CTCSS/DPL Values Reading Frequency ValuesChanging Values Reading Auto-Scan ValuesConfiguring a Code Configuring a FrequencyConfiguring Auto-Scan Frequency and Code Charts Frequency and Code ChartsRDM Series Murs Frequency Chart RDM2020 Murs Non-Display Model Default Frequencies and Codes Ctcss Codes Frequency and Code Charts Ctcss and PL/DPL CodesPL/DPL Codes 654 129 Customized PL 445 112 662 130 139 190 USE and Care USE and CareTroubleshooting TroubleshootingRange. Check for clear line of sight to improve transmission Radios are too close they must be at least five feet apart VOX feature might be set to OFF Canada Warranty forMotorola Limited United StatesExclusions WarrantySoftware Copyright Notice HOW to Obtain Warranty Service or Other INFORMATION?Software WHO is COVERED?Export LAW Assurances Patent NoticeBattery AccessoriesAccessories Audio AccessoriesCables Power Supplies AC PIN AdaptorsPower Supplies Software ApplicationsAccessories Page 68012002002
Related manuals
Manual 2 pages 27.9 Kb