Motorola RDM2020, rdm2080d manual Reading Frequency Values, Reading CTCSS/DPL Values

ADVANCED CONFIGURATION

Reading Frequency Values

The Frequency value is only one digit as RDM Series MURS Two-Way radios have 5 predefined frequencies.

To read frequency values:

1.From “Idle” Advanced Configuration Mode, short press the PTT button to hear the first value (Refer to "Advanced Configuration (RDM2020 Model)" on page 44). This value corresponds to the frequency's first digit value.

1

Frequency
	First		PTT
	Digit
			Long
PTT		Long
			PTT
		PTT

2.Short press the PTT button to read CTCSS/DPL values.

Reading CTCSS/DPL Values

When reading the values for CTCSS/PL Codes the radio signals the digit codes each time the PTT button is short pressed. The RDM Series have up to 213 codes available (Refer to "Frequency and Code Charts" on page 50).

The following is an example of the order in which the radio signals the “118” CTCSS/DPL code:

1	1	8
First		Third
Digit		Digit

Second Digit

To read CTCSS/DPL Values:

1.Short press the PTT button. The radio signals the first digit “1” .

English 46