Avaya 4.2 manual Apache Web Server WML Configuration, Microsoft IIS Web Server WML Configuration

8.3 Apache Web Server WML Configuration

Apache is an open-source web server that is available on many platforms. Basic familiarity with Unix is necessary to configure it. The following is a step-by-step guide for configuring Apache Web-server:

1.To set MIME types in Apache, a plain text file called httpd.conf is used.

2.The location for this file varies depending on the individual setup, but the most usual path is /etc/httpd/conf/ httpd.conf. If the operating system is Windows, then look for a folder called conf under where Apache is installed.

3.Using a text editor, open httpd.conf.

4.Scroll down to the AddType section (usually at the bottom of the file) and add the following line: AddType text/ vnd.wap.wml wml

5.Save the file.

8.4Microsoft IIS Web Server WML Configuration

Microsoft Internet Information Server (IIS) is configured through the Internet Service Manager.

The following step-by-step guide can be used to set up MIME types necessary for WML:

1.Select Start Control Panel Administrative Tools Internet Services Manager.

2.Right-click on Server and select Properties.

3.In the Computer MIME Map section, click Edit.

4.Click New Type and create a new file type using the parameters below:

∙Associated extension: wml

∙Content type: text/vnd.wap.wml

5.Click OK.

6.Stop and restart the web server so that the newly added MIME types are picked up.

H323 Install	Page 76
IP Office 4.2	15-601046 Issue 14j (10 March 2009)