| |
| TA 850 |
| T1 RCU VoATM |
| Page 43 of 72 |
|
|
NAPT ADDRESS | Represents the public address that is being used as the |
| NAPT address. |
ENTRY COUNT | The number of entries in the NAT table. |
ENTRY OVERFLOW | A count of the dropped entries due to low memory. |
COUNT |
|
RIP
Use this menu to enable RIP on the WAN interface. (See RIP on page 40 for description of options.)
RFC 1484 Bridge
This is used to enable bridge mode on this PVC.
Configuring the Router – Status
Use the ROUTER/STATUS menu to view and set the parameters shown in Figure 12. The ROUTER/STATUS screens give the user useful information for debugging the current routes in the 850.
Figure 12. Router/Status Menu
>Session
This menu maintains statistics about the active ATM PVCs.
>ARP cache
This is a listing of the currently connected Ethernet port on the LAN.
>Bridge Table
This shows the detected MAC addresses and the interface to which they are associated.
>IP Routes
This shows the current routes in the 850 and their use.
>LAN Stats
This shows traffic over the LAN interface.
© 2001, ADTRAN, Inc. | TA 850 User Manual |