ADTRAN 61200375L1-1 TA T1 RCU VoATM UIG/61200376L2-31A Page 66, Voice Turn Up Step Action

61200375L1-1 TA 850

T1 RCU VoATM UIG/61200376L2-31A Page 66 of 72

Voice Turn Up

Step	Action
1	From the TA 850 main menu, select the WAN menu. (Here you set up
	the ATM network.)
2	Select the ATM CONFIG menu.
3	Enter the IDLE CELLS format for your network.
4	Set DATA SCRAMBLING appropriately for your network.
	Back all the way out to the top level TA 850 menu, and then select the
5	VOICE menu. (From this menu, the appropriate Voice information for
	working with the Voice Gateway is entered.)
	Select CONFIG, and from the CONFIG menu, enter the Gateway type
	under CALL CONTROL and enter the VPI and VCI values for
6	communicating with that Gateway.
	For this application, CALL CONTROL should be set to Jetstream and the
	VPI and VCI values should be set appropriately for your network.
	To verify correct setup, use the STATUS menu (under the VOICE menu)
	to look at the current status of the voice connection.
	Under STATUS, you can view the GATEWAY STATS and information
7	about the voice PVC along with information about the POTs ports
	available on the Gateway.
	The GATEWAY STATS menu should show the Gateway Link is up (if
	everything is configured correctly).

TA 850 User Manual © 2001, ADTRAN, Inc.