ADTRAN UIG, 61200376L2-31A user manual Maint Port Menu

61200375L1-1 TA 850

T1 RCU VoATM UIG/61200376L2-31A Page 26 of 72

>Maint Port Menu

The TA 850’s VT 100 CRAFT port can be accessed in two ways. One is a DB 9 located on the front, and the other is an RJ 48 located on the rear. The setup for these ports is under this menu.

Password Protect

When set to NO, the maintenance port is not password protected. When ON (def), the TA 850 will prompt for a password upon startup.

Password

This is the text string that is used for comparison when password protecting the maintenance port. By default, no password is entered.

The security level for the maintenance port is always set to 0. This gives full access to all menus.

Passwords are case-sensitive.

Instructions for Changing Passwords

Step Action

1Select the PASSWORD field—a new PASSWORD field displays.

2Type the new password in the ENTER field.

3Type the new password again in the CONFIRM field.

The password can contain up to 12 alphanumeric characters. You can also use spaces and special characters in the password.

Baud Rate

This is the asynchronous rate that the maintenance port will run. The possible values are 300, 1200, 2400, 4800, 9600 (def), 19200, 38400, and 57,600.

Data Bits

This is the asynchronous bit rate that the maintenance port will run. The possible values are 7 or 8 (def) bits.

Parity

This is the asynchronous parity that the maintenance port will run. The possible values are NONE (def), ODD, or EVEN.

TA 850 User Manual © 2001, ADTRAN, Inc.