61200375L1-1 TA 850 T1 RCU VoATM UIG/61200376L2-31A
Page 49 of 72
Managing the Modules – V.35 Setup
Use the V.35 SETUP menu to view and set the parameters shown in Figure 17.
Figure 17. V.35 Setup Menu
CHANNEL RATE and EIA settings are supported via this menu option. For all typical applications, these settings are left in their default states.
>ATM/FR IWF
This menu contains the setup and status for the ATM/Frame Relay interworking functions.
Mode
The MODE setting configures the V.35 port for FRF5 or FRF8 operation, depending upon the application being supported.
FRF5
This is also known as Network Interworking. Use this mode for Frame Relay over ATM.
FRF8
This is also known as Service Interworking. In this mode, the TA 850 performs a translation between Frame Relay and ATM protocols.
Configuration
The CONFIGURATION menu is used to support the configuration of
© 2001, ADTRAN, Inc. | TA 850 User Manual |