ADTRAN user manual 61200375L1-1 TA T1 RCU VoATM UIG/61200376L2-31A Page 68

61200375L1-1 TA 850

T1 RCU VoATM UIG/61200376L2-31A Page 68 of 72

.

IP Routing

Step	Action
1	From the TA 850 main menu, select the WAN menu. (Here you set up
	the ATM network.)
2	Select the ATM CONFIG menu.
3	Enter the IDLE CELLS format for your network.
4	Set DATA SCRAMBLING appropriately for your network.
5	Back all the way out to the top level TA 850 menu, and then select the
	ROUTER menu.
	Select CONFIGURATION.
6	From the CONFIGURATION menu, you will set up addresses for your LAN
	and WAN.
	For basic IP routing, use all the default values from the GLOBAL menu.
7	From the ETHERNET menu, enter the IP menu to enter your LAN
	configuration.
	Enter your LAN IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY
8	information.
	For this example, the IP ADDRESS is 192.168.1.2, the SUBNET MASK is
	255.255.255.0, and the DEFAULT GATEWAY is 10.25.4.10.
	Arrow back to the main ROUTER CONFIGURATION menu, and select the
9	WAN menu and then the ATM menu. (Here you will enter your data
	PVC information.)
10	Create a new PVC by entering the menu. Enter your VPI and VCI
	values.
	From the RFC1483 IP menu, enter your LAN information.
11	For this example, the FAR END IP ADDRESS is 10.25.4.9, the IP
	NETMASK is 255.255.255.252, and the LOCAL IP ADDRESS is 10.25.4.10.
12	Arrow back to the top level TA 850 menu to activate your changes.

TA 850 User Manual © 2001, ADTRAN, Inc.