61200375L1-1 TA 850 T1 RCU VoATM UIG/61200376L2-31A
Page 29 of 72
Start Transfer
This activator is used when the configurable items in this menu are complete.
Before using START TRANSFER, the TA 850 should have a valid IP address, subnet mask, and default gateway (if required).
Abort Transfer
Use this activator to cancel any TFTP transfer in progress.
>Config Transfer
Used only with TFTP transfers. Sends a file containing the TA 850 configuration to a file on a TFTP server using the TFTP protocol. CONFIG TRANSFER also lets you save the TA 850 configuration as a backup file, so you can use the same configuration with multiple TA 850 units. In addition, CONFIG TRANSFER can retrieve a configuration file from a TFTP server.
To support these transfers, ADTRAN delivers a TFTP program with the TA 850 called TFTP Server. You can config- ure any PC running Microsoft Windows with this software, and store a configuration file. See Appendix B. Updating TA 850 Firmware using TFTP on page 57 for details on how to use TFTP Server.
Before using CONFIG TRANSFER, the TA 850 should have a valid IP address, subnet mask, and default gateway (if required).
Only one configuration transfer session (upload or download) can be active at a time.
Transfer Method
Displays the method used to transfer the configuration file to or from a server. Currently, you must use TFTP.
Transfer Type
Only BINARY transfers are currently supported.
TFTP Server IP Address
Specifies the IP address of the TFTP server. Get this number from your system administrator.
TFTP Server Filename
Defines the name of the configuration file that you transfer to or retrieve from the TFTP server. The default name is ta 850.cfg, but you can edit this name.
Current Transfer Status
Indicates the current status of the update.
© 2001, ADTRAN, Inc. | TA 850 User Manual |