61200375L1-1 TA 850
T1 RCU VoATM UIG/61200376L2-31A Page 46 of 72
Configuring Voice Support – Config
Use the VOICE/CONFIG menu to view and set the parameters shown in Figure 14.
Figure 14. Voice/Config Menu
>Call Control
The CALL CONTROL setting is used to configure the correct Voice Gateway protocol for voice signaling control be- tween the TA 850 and the configured Gateway. The CALL CONTROL setting must be configured correctly before the voice circuits will work correctly. The TA 850 supports Jetstream, Tollbridge, and CopperCom Voice Gateways.
>VPI
The VPI setting is used to configure the TA 850 virtual path setting used to communicate with the configured Voice Gateway.
>VCI
The VCI setting is used to configure the TA 850 virtual circuit setting used to communicate with the configured Voice Gateway.
TA 850 User Manual | © 2001, ADTRAN, Inc. |