Spectrum Brands SP-550 manual Restrict 1+ Feature

Page 26

Long distance		restriction.	RESTRICT 1+
Restrict	any	outgoing
number	dialing that begins
with a “1” .
			PRESS 1=ON 2= OFF

12/01 PM 12:00

RESTRICT: 1+

Note: Programming can

!only be performed when phone is on-hook

Note: With 1+ Restrict Dialing,

!the user cannot dial any number beginning with a 1.

Restrict 1+ Feature

(Administrator Programmable Only)

This feature allows the Administrator to restrict the use of 1+ long distance call- ing.

To enable RESTRICT 1+.

1.Press and hold the “STORE” key for 6 seconds.

2.Press “STORE” multiple times until the LCD displays “RESTRICT 1+”.

3.The display will read “ PRESS 1 =

YES 2 = NO”

4.To enable restriction, press “1” on the keypad.

5.To disable restriction, press “2” on the keypad.

6.To exit the program mode, press “DISC” or continue to the end of programming by pressing the “STORE” key multiple times until the display reads “All Setup OK”.

25

Image 26

Contents Page Headset Feature Installing a HeadsetUsing a Headset Placing/Answering a Call Using the Headset On/Off FeatureThis page is intentionally left blank Page Important Safety Instructions FCC Part 15 Compliance DOC Notice and Load Number Statement Consumer Information Page Page TOP Panel Page Bottom Panel Page Parts Check List Power Adapter Line Connection 120V AC Outlet Recovery Power Adapter providedConnector Configuration Power Adapter Phone ConnectionInstalling The Wall Power Adapter optional Completing the Power InstallationConnecting the Handset Cord Installing the KeycapsWall Mounting the SpectrumPLUSTM Telephone Desk MountingMessage Waiting Light Indicator Low Voltage LED Switch System Hold Feature Option Switch Administrator FeatureProgramming Set Up Of the SpectrumPLUSTM Telephone Voice Mail no PIN Number Second of WAIT? ALL Setup OKUsers Quick Program Guide for the SpectrumPLUSTM Telephone Live Dialpad Feature Administrator Programmable OnlyRestrict 1+ Feature Using a Flash When Dialing Programming Flash Timing into MemoryProgramming Flash Timing Programming Example for 100mSProgramming Pause Timing Four ExamplesTo Program a Timed Pause Using a Pause when DialingProgramming a Pause into Speed Dial Memory To Delete The Access Code Programming the Access Number into MemoryTo Set Up The Access Number Programming the Area Code into Memory Programming the Area Code into MemoryProgramming Voice Mail Voice Mail no PIN Number Second of WAIT?Programming Voice Mail Dialing Test the programAdministrator Programmable Only Manual Entry of Characters To Program Speed Dial LocationsTo Verify Speed Dial Programming To Verify Speed Dial LocationsManual Entry From Keypad Guide Press Once Twice Three Four Five Times Six TimesLOW Volt MW Using a Headset LCD Backlighting Display Information Management KeysLCD Contrast Feature 4-step LCD Call Record DisplayLCD Caller ID* Display Featured Icons 12/01 PM1200LCD Caller ID* Display Information Management Keys 12/01 PM1226 LCD Caller ID Display Information when On Hook with Messages LCD Caller ID* Display Information when Dialing 7196388821 022 PhBook Delete DialPM1200 Type II Caller Identification Caller ID Display Type Incoming Call Waiting CWSetting Date & Time Automatically Phone Book Storage Capacity Scrolling For The Most Current Caller ID Records Scrolling and Call Back FeatureScrolling For Stored Records Scrolling For The Oldest Caller ID Re- cordsDelete All Stored Call Records Adding a Phonebook Record From a Caller ID Record Adding a Caller Record To The PhonebookAdding a Phonebook Record Manually Manually Adding a Phonebook Record Into MemoryTo Dial From the Phonebook Directory Dialing From the Phonebook DirectoryHyperlink to a Stored Record Call Record Editing Prior to Dialing Invalid Entry Display Line Error DisplayOther LCD Displays No Calls Display PhoneBook Full DisplayHeadset Key Indicators Speaker Line IndicatorsHold Key Indicators Placing a Call Using Speakerphone Using the Data Port Using the Hold Feature Using The Mute Feature Using the Redial Feature Using The Disconnect Feature Key Handset Volume Control Page Page Part List Description Number Price Parts ListTo Place An Order Statement of Limited Warranty