Spectrum Brands SP-550 manual To Verify Speed Dial Programming, To Verify Speed Dial Locations

To Verify Speed Dial Programming

(Administrator Programmable Only)

The contents of each speed dial location can be verified or “checked” while the SpectrumPLUSTM unit is in the programming mode.

?Memory verification is accomplished with the SpectrumPlustm on-hook.

To Verify Speed Dial Locations

1.Press and hold the “STORE” key for 6 seconds to activate Administrator mode. The words “ENTER ACCESS NO.” will appear (figure 1).

2.Next, press the speed dial location key to verify. The display will show the memory location, the name, and the number in memory.

3.To check other memory locations, simply press other speed dial locations.

4.To exit the program mode, press “DISC”

!

Note: Programming can only be performed when phone is on-hook

!

NOTE: Blank index card sheets are provided for convenience. Complete and place the index card into the speed dial memory key.

!

NOTE: A Caller ID record cannot be stored into the speed dial key memory location. Entries can only be made manually by the Administrator programming feature. This is for purposes of security and standardization of speed dial locations.

35