Spectrum Brands SP-550 Programming the Access Number into Memory, To Set Up The Access Number

Programming the Access Number into Memory

(Administrator Programmable Only)

In some cases, a digit or digits are required to access an outside line (i.e. 9) . The Access Number can be programmed into the phone memory at the option of the Administrator. This function allows the user to automatically dial number(s) that are required prior to dialing the displayed number.

?The number to be programmed is based on your specific area dialing requirements and may not be required.

?This option is not mandatory for the proper operation of the Caller ID display.

Set up pre-dialing number	ENTER ACCESS NO
sequence, i.e. outside line.

Note: Programming can

!only be performed when phone is on-hook

12/01 PM 12:00

9 - - - -

ENTER ACCESS NO.

To Set Up The Access Number

1.Press and hold the “STORE” key for six seconds to enter programming.

2.Press “STORE” until the LCD display reads “ENTER ACCESS NUMBER”.

3.Enter the desired number, for example, a “9”.

4.Press the “STORE” key to enter the number into memory.

!

NOTE: There is no need to enter PAUSE. The Call Back operation automatically inserts a pause after the Access Code Number.

To Delete The Access Code

1.Press and hold the “STORE” key for six seconds to enter programming.

2.Press the “STORE” key until the LCD display reads “ENTER ACCESS NUMBER”.

3.Press the “DELETE” key.

4.Press the “STORE” key again to continue.

30