RAD Data comm Vmux-2100 Voice Trunking Gateway operation manual Management Menu

Vmux-2100Installation and Operation Manual Chapter 4 Management from a Terminal

Management

1.Host IP

2.Manager List

3. Host Mux Name ...

4.User Administration

5.Signaling Configuration

6. Telnet(Enable)

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

			Figure 4-6. Management Menu
		2. From the Management, choose Host IP.
		The Host IP menu appears (see Figure 4-7).
	Host IP
1.		Set Host IP address	... (170.185.190.15)
2.		Set Subnet Mask	... (255.255.255.0)
3.		Set Default Gateway	... (170.185.190.1)

4.Trap... (public)

5.Read... (public)

6.Write...(private)

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 4-7. Host IP Menu

3.From the Host IP menu, choose the following: Set Host IP address to define the host IP

Set Subnet Mask to define the subnet mask

Set Default Gateway to set the default gateway IP

Trap... to enter the name of a community to which the Vmux-2100 will send traps

Read… to enter the name of a community with read-only authorization Write… to enter the name of a community with write authorization.

4. Enter the desired value, and press <Enter>.

Configuring the Vmux-2100 System 4-7