RAD Data comm Vmux-2100 Voice Trunking Gateway operation manual Collecting Statistics

Vmux-2100Installation and Operation ManualChapter 7 Monitoring and Statistics Collection

Table 7-2. Sanity Errors and Warnings (Cont.)

Display	Type	Description
ILLEGAL DESTINATION IP	Error	Destination IP address for a bundle is not defined
ADDRESS
ILLEGAL SOURCE IP ADRESS	Error	A group IP address is illegal or not defined

Note: The following IP addresses are reserved for the main and voice card internal communication and cannot be assigned by the user: 1.1.1.255 and 1.1.1.0 to 1.1.1.8.

TS INCLOMPATIBLE WITH E1	Error	Timeslot 16 is configured to HDLC when E1 is set to the
TYPE		G.732S framing mode. Timeslot 16 configuration must be
		changed to not connected
TOO MANY CONFIGURED	Error	Number of timeslots assigned to carry voice exceeds the
TS		number of timeslots supported by the unit
TS 16 SHOULD BE	Error	Timeslot 16 is configured to Voice when operating Vmux-2100
DISCONNECTED IN CAS		with CAS signaling. Timeslot 16 configuration must be changed
MODE		to not connected

7.3 Collecting Statistics

This section explains how to display performance data collected on the

Vmux-2100 main link and E1/T1 groups.

Displaying Statistics on the Main Link Ports

Vmux-2100 evaluates performance of the 10/100BaseT port and calculates the main card CPU utilization.

Collecting the Main Link Ethernet Statistics

To display the main link Ethernet statistics:

1.From the Main menu, choose Monitoring. The Monitoring menu appears.

2.From the Monitoring menu, choose Statistics. The Statistics menu appears (see Figure 7-6).

Statistics

1.Cards statistics

2.Main Module statistics

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 7-6. Statistics Menu

3.From the Statistics menu, choose Main Module statistics. The Main Module Statistics menu appears (see Figure 7-7).

Collecting Statistics 7-7