Chapter 4 Management from a Terminal | |
|
|
266–399 Feet
Next, the timeslots that are to carry user data are assigned by choosing Time Slot Table From the T1 Parameters menu (as described for the E1 links)
Time Slot Table |
|
|
|
|
|
|
|
|
|
|
| ||
| Ts# | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
|
| Yes | Yes | Yes | No | No | No | No | No | No | No | No | No |
| Ts# | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 |
|
| No | No | No | No | Yes | No | No | No | No | No | No | No |
1. | No |
|
|
|
|
|
|
|
|
|
|
|
|
2. | Yes |
|
|
|
|
|
|
|
|
|
|
|
|
@ - Db Update; # - Db Undo
Figure 4-28. Time Slot Table (for T1 Link)
From the Time Slot Table, toggle between timeslots by pressing <Tab>, and assign the timeslot(s) that are to carry data by entering Yes. To disconnect a timeslot, enter No.
Note Since
Configuring E1/T1 Groups and Bundles
Each pair of external E1/T1 ports of the
Configuring a Group
You have to assign an IP address to each E1/T1 group.
To assign an IP address to a group:
1.From the Card menu, select a slot, to which belong a group you want to configure by choosing the corresponding number.
The Slot menu appears (see Figure