RAD Data comm Vmux-2100 Voice Trunking Gateway Displaying the E1/T1 Group Memory Statistics

Vmux-2100Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection

Displaying the E1/T1 Group Memory Statistics

Vmux-2100 estimates the number of free memory blocks (2000 bytes each) left in the E1/T1 group RAM (see Figure 7-16):

•Start Blocks – Number of free memory blocks after the startup

•Current Blocks – Number of free memory blocks available at the moment

•Min. Blocks – Minimum number of free memory blocks ever registered by the Vmux-2100 management software.

To display the E1/T1 group memory statistics:

1.From the Cards Statistics menu (see Figure 7-11), choose Memory Statistics.

2.From the Memory Statistics menu, choose Slot> and then enter the desired slot number from the displayed list to select the slot.

3.From the Memory Statistics menu, choose Group Number> and then enter the desired group number from the displayed list to select the group.

4.From the Memory Statistics menu, choose Display to display the E1/T1 group memory statistics (see Figure 7-16).

Memory Statistics on Slot 2, Group 1				Current blocks	:[	1817	]
Start blocks	:[	2663	]
Min blocks	:[	1748	]

Figure 7-16. E1/T1 Group Memory Statistics Screen

Displaying Bundle Statistics

The Vmux-2100 software enables you to evaluate performance of an individual bundle (see Figure 7-17). Table 7-7describes the bundle statistics values.

The bundles may have one of the following statuses:

•Connect – The bundle is connected

•Disconnected – The bundle is disconnected

•Echo Wait – There is physical connection, but remote bundle is not active.

•IP OOS – There is no physical connection between bundles. The reason for that can be an illegal IP address of the destination E1/T1 group.

Collecting Statistics 7-17