RAD Data comm operation manual Restoring Default Settings, Resetting Vmux-2100

Chapter 4 Management from a Terminal Vmux-2100Installation and Operation Manual

4.8 Restoring Default Settings

You can restore default settings of the external E1/T1 ports. Restoring the E1/T1 defaults erases the E1/T1 port identification in the database, user’s configuration of the group IP addresses, defined bundles and assigned timeslots. The system and main link parameters are not affected.

To restore the Vmux-2100 to the defaults:

1.From the System menu (see Figure 4-5), choose Factory Defaults. Vmux-2100 displays the following message:

Are you sure you want to initialize to default configuration(Y/N)?

2.Type Y, and press <Enter>.

Vmux-2100 restores the settings of the external E1/T1 ports to their default settings.

4.9 Resetting Vmux-2100

The Vmux-2100 management software allows you to re-initialize a single E1/T1 group of each voice module or a mainboard CPU.

To reset the Vmux-2100 components:

1. From the System menu, choose Reset Card.

The Reset Card menu appears (see Figure 4-40).

Reset Card

1.Reset Slot-1 Group-1

2.Reset Slot-1 Group-2

3.Reset Slot-2 Group-1

4.Reset Slot-2 Group-2

5.Reset Slot-3 Group-1

6.Reset Slot-3 Group-2

7.Reset Slot-4 Group-1

8.Reset Slot-4 Group-2

9.Reset MainBoard

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 4-40. Reset Card Menu

2.From the Reset Card menu, select a Vmux-2100 component to reset by typing its number, and pressing <Enter>.

Vmux-2100 displays the following message:

Are you sure you want to reset the card ? Press Y/N

3. Type Y, and press <Enter>.

The card is re-initialized, its active software is decompressed and loaded into the RAM.

4-32 Resetting Vmux-2100