RAD Data comm Vmux-2100 operation manual Collecting the Main Link Hdlc Statistics

Chapter 7 Monitoring and Statistics Collection Vmux-2100Installation and Operation Manual

To clear the main port Ethernet statistics:

•From the Ethernet Statistics menu, choose Clear to reset the Ethernet performance registers.

Collecting the Main Link HDLC Statistics

If the Vmux-2100 unit is equipped with an E1 or T1 main link, the HDLC Statistics option line will appear on the Main Module Statistics menu (see Figure 7-7)

To display the main link HDLC statistics:

1.Choose HDLC statistics

2.From the HDLC Statistics menu, choose Display to display the main link HDLC statistics.

Figure 7-9illustrates the Ethernet statistics screen. Table 7-4describes the HDLC statistics values.

HDLC Statistics
				Rx statistics
Total Frames	:[ 33257592 ]			Total Bytes		:[222811066 ]
BSY Error	:[	71	]	GLITCH Error		:[	0	]
DE Error	:[	0	]	LG	Error	:[	0	]
NO Error	:[	1281	]	AB	Error	:[	1290	]
CR Error	:[	306	]	OV	Error	:[	0	]
				Tx statistics
Total Frames	:[ 31103898 ]			Total Bytes		:[ 41353332 ]
UNDERRUN Error :[		0	]	GLITCH Error		:[	0	]
BandWidth To TDM - Average:[				32616]	Max :[	153744] (bit/Sec)
BandWidth To Line- Average:[				33696]	Max :[	156568] (bit/Sec)
				Tx Queue
Max Frames	:[	0		]	Current Frames :[			0	]
Free Frames	:[	0		]

Press 'Y' for refresh , ESC - for exit.

ESC-prev.menu; !-main menu; &-exit

Figure 7-9. Main Link HDLC Statistics Screen

7-10 Collecting Statistics