AT&T TL92378 user manual Installation, Avoid placing the telephone base too close to

Getting started

Installation

You must install and charge	STOP!	See pages 8-9 for easy
the handset battery before
		instructions.
using the cordless handset.

Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 10). For optimum range and better reception, place the telephone base in a central and open location.

You may hear interference if your cellular phone is too close to the telephone base during a CELLULAR call. Make sure that your Bluetooth enabled cellular phone is between one to 12 feet away from the telephone base in order

to maintain a clear and consistent connection between your Bluetooth cell phone, telephone base and cell tower.

If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line(s), you must install a DSL filter between the telephone base and the telephone wall jack (see the following page). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.

Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use.

For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Avoid placing the telephone base too close to:

•Communication devices such as: television sets, VCRs, or other cordless telephones.

•Excessive heat sources.

•Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting.

•Excessive dust sources such as a workshop or garage.

•Excessive moisture.

•Extremely low temperature.

•Mechanical vibration or shock such as on top of the washing machine or workbench.