AT&T TL92378 user manual Message counter displays

Answering system

Message counter displays

The message counter usually displays the total number of answering system messages. See the table below for other message counter displays.

Message counter displays

0	No messages.
0 (flashing)	The clock needs to be set (pages 53-54).
02, 04, 06,	Displayed while setting the number of
	rings (page 59).

1-8

1-99

Displayed for two seconds while adjusting the telephone base speaker volume.

Total number of old messages and memos, or message number currently playing.

1-99(counting)	Elapsed time while recording a memo
	(page 64) or announcement up to 90
	seconds (page 56).
1-99(flashing)	Total number of messages and memos.
	The number flashes when there are new
	(unreviewed) messages.
	After a power failure, the number in the
	message counter will flash to indicate the
	clock needs to be set.
1-99 & F	Memory is full. Messages must be
(alternating)	deleted before new messages can be
	recorded.
10-99	Current remote access code while setting
	(page 60).
99 (flashing)	A memo recording is longer than 99
	seconds.
--	The system is answering a call, being
	accessed remotely, or the clock is being
	set.
-- (flashing)	The system is being setup, initialized or
	messages are being deleted.
HI, LO, OF	Displayed for two seconds while
	adjusting the telephone base ringer
	volume.

65