Bluetooth
NOTE: If the connection between the paired device and the telephone base does not resume by manually connecting the device on the paired device list, you will need to unpair or deregister the device from the cellular phone. Make sure the device is no longer on the paired list after deregistration; then follow the steps in Pairing a device on page 17 to start the pairing procedures again.
Bluetooth setup
Turning off the auto connection
If you do not want the telephone base to re- connect to a paired device automatically after it is disconnected, you can turn off the auto connection feature manually. In order to turn off the auto connection, you will need to initiate a disconnection from the paired cellular phone; this will transmit a signal to the telephone base and disable the auto connection.
While the cellular phone is connected to the telephone base, find the cellular phone’s Bluetooth device list and select AT&T DECT 6.0 to manually disconnect the device. (If disconnection is not an option on your cellular phone, you may need to disable Bluetooth or unpair the telephone base.) Refer to your cellular phone’s user’s manual for instructions. The telephone base will not search and
To resume the auto connection
To resume the auto connection between the paired device and the telephone base, you will need to connect the device manually. Make sure the Bluetooth feature is turned on in your cellular phone. Select AT&T DECT 6.0 from the paired device list in your cellular phone to reconnect.
If the connection is successfully resumed, the 
status icon will display on the cordless handset screen, and the light of the Bluetooth button on the telephone base will be on steadily.
Replace a paired device
If you want to pair and connect a new device when there is already a device paired with the telephone base, press and hold the Bluetooth button on the telephone base until it is flashing, then start with step two of Pairing a device on page 17. If you do not pair a new device within two minutes, the Bluetooth light on the telephone base will turn off and the system will return to idle mode.
18