Telephone operation
Intercom call transfer
Models SL82308/SL82408
1.During a conversation with an external call, press INT. The external call is automatically placed on hold and TRANSFER TO: is displayed on the screen.
2.Enter the destination handset number (1, 2, 3 or 4). The originating set’s screen will show CALLING HANDSET X. The destination handset will ring, and its screen will show HANDSET X IS CALLING.
3.On the ringing destination handset, press 
PHONE/FLASH, INT, 
SPEAKER, or any dial pad key
4.Press 
OFF/CLEAR on the originating handset or placing that handset in the telephone base or handset charger to complete the transfer. The originating handset’s screen will show CALL TRANSFERRED and the other handset will automatically be connected to the external call.
NOTES:
1.Before the intercom call is answered, you can cancel the transfer and return to the external call by pressing
OFF/CLEAR, 
PHONE/FLASH, or INT.
2.If the destination handset does not answer the intercom call within 100 seconds, or if the other handset is in the directory or call log mode, or out of range, the originating handset will show UNABLE TO CALL TRY AGAIN on its screen and will automatically return to the external call.
3.You can switch between the intercom call and the outside call by pressing INT on the originating handset. The display will change between INTERCOM and OUTSIDE to indicate which party is active.
4.You can end the intercom call and return to the external call by pressing 
PHONE/FLASH on the originating handset.
16