AT&T 9353 user manual If you have difficulty hearing messages, If CL appears in the Message Window

Page 24

9353_book_1ATT 6/7/01 1:56 PM Page 20

IN CASE OF DIFFICULTY

If you have difficulty hearing messages:

Check the volume setting.

If the system does not answer after the correct number of rings:

Make sure that the answering system is on.

If Toll Saver is on, the number of rings changes to two when you have new messages waiting.

In some cases, the system may be affected by the ringing system used by the local telephone company.

If the memory is full or the system is off, the system answers after 10 rings.

If CL appears in the Message Window:

You need to reset the clock.

If the system does not respond to commands from a remote touch tone phone:

Make sure you are calling from a touch tone phone. When you dial a number, you should hear tones. If you hear clicks instead, the phone is not a touch tone telephone.

The answering system may not detect the Remote Access Code while your announcement is playing. Try waiting until the announcement is over before entering the code.

Make sure you enter your Remote Access Code correctly.

There may be noise or interference on the phone line you are using. Press keys firmly.

If your outgoing announcement isn’t clear:

When you record your announcement, make sure you speak in a normal tone of voice, about nine inches from the base.

Make sure there is no “background” noise (TV, music, etc.) while you are recording.

20

Image 24
Contents Revised Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents 9353book1ATT 6/7/01 156 PM Installation Before You InstallInstall the handset battery Attach the belt clip to the cordless handset optional Charge the handset battery Set the dial modeCheck for dial tone Wall Installation Connect the telephone line cord Connect the power cordFollow Steps 3-5 in Table/Desk Installation Mount the base on the wallTelephone Operation Page/Handset Locator Temporary Tone Dialing Handset Ringer StyleRinger Off Headset Jack Operating RangeTelephone Memory Audible Indicators Answering System OperationSet the Clock About MailboxesRecord Your Announcement Press Uuntil you hear Change announcementAnswering System Feature Setup Feature SummaryVolume Listen To, Save & Delete MessagesCall Screening/Intercept Record a MemoMessage Window Display Remote Access Commands Connect with the Answering SystemVoice Menu End remote access call Record memoTurn system off Turn system onCharging the Handset Battery Pack Replacing the Handset Battery PackBatteries If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels If messages are incompleteIf you have difficulty hearing messages If CL appears in the Message WindowIf your outgoing announcement isn’t clear