AT&T 9353 user manual Installation, Before You Install, Install the handset battery

Page 5

9353_book_1ATT 6/7/01 1:56 PM Page 1

INSTALLATION

Before You Install

1Choose a location for the base near an electrical outlet and a telephone jack.

This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch.

2Install the handset battery.

a) Remove	b) Plug battery
battery	pack connector
compartment	into handset.
cover by	Use only AT&T
pressing on	battery 3301
the indentation	(SKU# 91076).
and sliding
downward.
c) Place battery
pack and wires
in compartment.

d) Replace cover by sliding it up into place.

1

Image 5

Contents Part 1 Important Product Information RevisedAdvanced American Telephones. All rights reserved Contents 9353book1ATT 6/7/01 156 PM Install the handset battery InstallationBefore You Install Attach the belt clip to the cordless handset optional Check for dial tone Charge the handset batterySet the dial mode Connect the telephone line cord Connect the power cord Wall InstallationFollow Steps 3-5 in Table/Desk Installation Mount the base on the wallTelephone Operation Page/Handset Locator Ringer Off Temporary Tone DialingHandset Ringer Style Operating Range Headset JackTelephone Memory Answering System Operation Audible IndicatorsSet the Clock About MailboxesPress Uuntil you hear Change announcement Record Your AnnouncementFeature Summary Answering System Feature SetupListen To, Save & Delete Messages VolumeMessage Window Display Call Screening/InterceptRecord a Memo Voice Menu Remote Access CommandsConnect with the Answering System Record memo End remote access callTurn system off Turn system onBatteries Charging the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels If messages are incompleteIf your outgoing announcement isn’t clear If you have difficulty hearing messagesIf CL appears in the Message Window