AT&T 9353 user manual Charge the handset battery, Check for dial tone, Set the dial mode

Page 7

9353_book_1ATT 6/7/01 1:56 PM Page 3

 

INSTALLATION

Table/Desk Installation

 

Modular

Standard

telephone jack

electrical

 

outlet

1 Connect the telephone line cord.

2Connect the power cord. The ANSWER ON/OFF light goes on, and CL flashes in the Message Window.

Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111.

3Charge the handset battery.

Place the handset in the base. Charge the battery for at least 24 hours the first time. After the first charge, the battery is typically fully charged overnight.

4Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged.

If you have dial pulse (rotary) service, you’ll need to change the dial mode. When the phone is off, press G, *, #, Mto set the dial mode to dial pulse. To return to touch tone dialing, press G, *, *, M.

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Part 1 Important Product Information RevisedAdvanced American Telephones. All rights reserved Contents 9353book1ATT 6/7/01 156 PM Before You Install InstallationInstall the handset battery Attach the belt clip to the cordless handset optional Set the dial mode Charge the handset batteryCheck for dial tone Mount the base on the wall Wall InstallationConnect the telephone line cord Connect the power cord Follow Steps 3-5 in Table/Desk InstallationTelephone Operation Page/Handset Locator Handset Ringer Style Temporary Tone DialingRinger Off Operating Range Headset JackTelephone Memory About Mailboxes Audible IndicatorsAnswering System Operation Set the ClockPress Uuntil you hear Change announcement Record Your AnnouncementFeature Summary Answering System Feature SetupListen To, Save & Delete Messages VolumeRecord a Memo Call Screening/InterceptMessage Window Display Connect with the Answering System Remote Access CommandsVoice Menu Turn system on End remote access callRecord memo Turn system offReplacing the Handset Battery Pack Charging the Handset Battery PackBatteries Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If messages are incomplete If you hear noise or interference when using the phoneIf you hear other calls while using your phone If you lose a call after changing channelsIf CL appears in the Message Window If you have difficulty hearing messagesIf your outgoing announcement isn’t clear
Top Page Image Contents