Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID history or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID history or redial list.
To get to the directory while on a call:
1.Press MENU/SELECT twice to enter >DIRECTORY.
2.Press qCID or DIRp to scroll to the desired number.
3.Press MENU/SELECT to dial the number shown.
To get to the caller ID history (call log) while on a call:
1.Press MENU/SELECT.
2.Press qCID or DIRp to scroll to >CALL LOG, then press MENU/SELECT.
3.Press qCID or DIRp to scroll to the desired number.
4.Press MENU/SELECT to dial the number shown.
To get to the last number redial while on a call:
Press REDIAL/PAUSE to show and dial the most recently dialed number. If you press REDIAL/PAUSE again within two seconds, the number is not dialed.
NOTES:
1.You cannot edit a directory entry while on a call. For more details about the directory, see page 26.
2.You cannot copy a caller ID entry into the directory while on a call. For more details about the caller ID history, see page 31.
3.If you press REDIAL/PAUSE while on a call, you can only view the most recent call, and you cannot erase the entry. For more details about the redial memory, see page 20.
4.Press and hold 
OFF/CLEAR to exit redial, directory or caller ID history when you are on a call.
22