AT&T 5845 user manual Handset Icons, This Icon Indicates

Page 38

5840_CIB_2ATT 2003.3.5 6:12 PM Page 34

HANDSET ICONS

THIS ICON: INDICATES

Line In Use indicator

On steadily with no number next to it when another phone on this line is in use.

On steadily with one or more numbers next to it, indicating which extensions are using the line.

For example, indicates that Handset 1 and Handset 2 are on an outside call.

Intercom indicator

On steadily with the extension numbers cur rently on

an intercom call. For example, indicates that the Base and Handset 2 are on an intercom call.

Battery indicator

When the handset is removed from the charger, this lets you know the level of charge in the battery pack,

from Full ( ) to Empty ( ).

Cycles (Low, Medium,and Full) when Handset battery is charging.

Flashes when a low battery condition is detected.

Ringer Off indicator

is displayed when the ringer is turned off.

EEnhanced Mode indicator

On steadily when active handset is in Enhanced mode. The handset will enter Enhanced mode automatically when in an area with interference.

MMute indicator

On steadily when the handset microphone is muted.

HHold indicator

On steadily when the line is on hold.

 

 

 

Handset Registration indicator

 

 

 

 

is displayed when a handset is either not registered,

 

 

 

or searching for the base unit.

 

 

 

 

 

0 – 6

Handset indicator

 

 

 

Number is displayed to show which handset is in use.

 

 

 

 

 

35

Image 38
Contents With Caller ID/Call Waiting Part 1 Important Product Information5840CIB2ATT 2003.3.5 611 PM Contents Parts List Before YOU BeginAbout Adding Handsets About Caller Identification Caller IDAbout the Calls Log Connect the telephone line cord Connect the power cord InstallationTable/Desk Installation Check for dial tone Install the handset batteryCharge the handset battery About Handset Registration Register an additional HandsetModel 5800 handsetWall Installation Follow Steps 3-5 in Table/Desktop InstallationSpare Battery/Power Failure Backup Belt Clip HeadsetSet Time Feature Setup HandsetFeature Setup Menu Clock Mode ¥NOTE The mid-boost setting is hearing-aid compatible Sound SelectRinger Volume Ringer Melody Vibrate Control Low Batt Tone Range Tone Keypad Tone Set Contrast Language Setting Feature Setup Base Ringer Melody Dial Mode Tone/Pulse Contrast Language Answer a Call Telephone OperationMake a Call At the HandsetBase Speaker VolumeHandset Make a Call Switch Between Handset and SpeakerphoneHandset Speakerphone Answer a CallBase Speakerphone Dialing OptionsDelete a Redial Number RedialSave a Redial Number Flash/Call Waiting BaseMute Hold Temporary Tone Dialing Display Screen Messages Screen Displays WhenHandset Icons This Icon IndicatesLight Status Indicates Base IconsBase Lights Three quick beeps Tones and What They MeanTone Indicates One beepIntercom Operation Intercom CallsAnswer an Incoming Call While on an Intercom Call Answering IntercomEnd Intercom From the Handset Blind Call TransferAnnounced Call Transfer From the BaseConference Calling Phone Book Store a Number and Name in Phone BookKeypad Characters Dial a Number in Phone Book Edit a Number/Name in Phone Book Delete a Number/Name in Phone Book Caller ID Operation Review Calls Log Store Record in Phone BookDisplay Dial Removing All Records Remove Call RecordsRemoving a Specific Call Record Turn Answering System On/Off Audible IndicatorsAnswering System Operation AT the Base Set the ClockAbout Mailboxes About AnnouncementsRecord Your Announcement AnnouncementAnswering System Feature Setup Feature Summary Delete Messages Listen to, Save & Delete MessagesPlay Messages Adjust Playback Volume Call Screening/InterceptRecord a Memo Message Window Display Window Displays WhenConnect with the Answering System Voice MenuRemote Access Commands Function CommandCharge the Handset Battery Pack Battery LifeBattery Indicator BatteriesSpare Battery Replace the Handset Battery Pack Problemsolution ProblemSolution Case of DifficultyIf your handset dis- plays Enter Base ID or no Base SUB If you hear noise or interference when using the phoneTo re-initialize the handset and base If your telephone Problem SolutionIf the phone does not ring when you receive a call MisdialsCaller ID If the caller’s name or phone number is not displayedIncomplete Answering SystemIf messages are If callers are unable to leave messages in Mailbox 2 orClear If your outgoingAnnouncement isn’t Function Default Setting Default SettingsDefault Settings Announce OnlyTechnical Specifications Technical SpecificationsIndex 5840CIB2ATT 2003.3.5 612 PM 5840CIB2ATT 2003.3.5 612 PM