AT&T 5845 user manual Case of Difficulty, Phone, Solution, Problemsolution

Page 68

5840_CIB_2ATT 2003.3.5 6:12 PM Page 64

IN CASE OF DIFFICULTY

If you have difficulty operating this phone,try the suggestions below. For Customer Service,visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase.

PHONE

PROBLEM

If the phone does not work at all, check these items first:

SOLUTION

Make sure the power cord is plugged into the base and an electrical outlet not controlled by a wall switch.

Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack.

Make sure the battery pack is installed correctly.

If the above suggestions do not solve the problem,try re-initializing the handset and base (see “To re-initialize the handset and base”on page 66).

PROBLEMSOLUTION

If you have no dial tone: Check all the previous suggestions. If you still do not hear a dial tone, disconnect the phone and try another phone in the same jack. If there is no dial tone on that phone either, the problem is probably in your wiring or local service.

PROBLEM

If you hear a long tone when you try to use the handset:

SOLUTION

The handset and base are not communicating properly. You might be out of range. Move closer to the base and try again.

If moving closer to the base does not help, follow the directions “To re-initialize the handset and base”on page 65.

65

Image 68
Contents With Caller ID/Call Waiting Part 1 Important Product Information5840CIB2ATT 2003.3.5 611 PM Contents Parts List Before YOU BeginAbout Adding Handsets About Caller Identification Caller IDAbout the Calls Log Connect the telephone line cord Connect the power cord InstallationTable/Desk Installation Check for dial tone Install the handset batteryCharge the handset battery About Handset Registration Register an additional HandsetModel 5800 handsetWall Installation Follow Steps 3-5 in Table/Desktop InstallationSpare Battery/Power Failure Backup Belt Clip HeadsetSet Time Feature Setup HandsetFeature Setup Menu Clock Mode ¥NOTE The mid-boost setting is hearing-aid compatible Sound SelectRinger Volume Ringer Melody Vibrate Control Low Batt Tone Range Tone Keypad Tone Set Contrast Language Setting Feature Setup Base Ringer Melody Dial Mode Tone/Pulse Contrast Language Telephone Operation Make a CallAnswer a Call At the HandsetBase Speaker VolumeHandset Switch Between Handset and Speakerphone Handset SpeakerphoneMake a Call Answer a CallBase Speakerphone Dialing OptionsDelete a Redial Number RedialSave a Redial Number Flash/Call Waiting BaseMute Hold Temporary Tone Dialing Display Screen Messages Screen Displays WhenHandset Icons This Icon IndicatesLight Status Indicates Base IconsBase Lights Tones and What They Mean Tone IndicatesThree quick beeps One beepIntercom Operation Intercom CallsAnswer an Incoming Call While on an Intercom Call Answering IntercomEnd Intercom Blind Call Transfer Announced Call TransferFrom the Handset From the BaseConference Calling Phone Book Store a Number and Name in Phone BookKeypad Characters Dial a Number in Phone Book Edit a Number/Name in Phone Book Delete a Number/Name in Phone Book Caller ID Operation Review Calls Log Store Record in Phone BookDisplay Dial Removing All Records Remove Call RecordsRemoving a Specific Call Record Audible Indicators Answering System Operation AT the BaseTurn Answering System On/Off Set the ClockAbout Mailboxes About AnnouncementsRecord Your Announcement AnnouncementAnswering System Feature Setup Feature Summary Delete Messages Listen to, Save & Delete MessagesPlay Messages Adjust Playback Volume Call Screening/InterceptRecord a Memo Message Window Display Window Displays WhenConnect with the Answering System Voice MenuRemote Access Commands Function Command Battery Life Battery Indicator Charge the Handset Battery Pack BatteriesSpare Battery Replace the Handset Battery Pack Problem SolutionProblemsolution Case of DifficultyIf your handset dis- plays Enter Base ID or no Base SUB If you hear noise or interference when using the phoneTo re-initialize the handset and base Problem Solution If the phone does not ring when you receive a callIf your telephone MisdialsCaller ID If the caller’s name or phone number is not displayedAnswering System If messages areIncomplete If callers are unable to leave messages in Mailbox 2 orClear If your outgoingAnnouncement isn’t Default Settings Default SettingsFunction Default Setting Announce OnlyTechnical Specifications Technical SpecificationsIndex 5840CIB2ATT 2003.3.5 612 PM 5840CIB2ATT 2003.3.5 612 PM