AT&T E5927B, E5947B, E5937B, E5926, E1937B user manual Remote access, Repeat or go back

1. Dial your telephone number from any touch-tone phone.

2. When system answers, enter two-digit remote access code (19 unless you have changed it).

3. Enter remote commands (see list at right).

4. Hang up to end call and save all undeleted messages.

Answering System Operatition

Remote access

A two-digit security code is required to access your answering system from any touch-tone phone.This code is 19 by default; see page 34 to change it.

Play all messages	Press to hear all messages.
1
Play new messages	Press to hear new messages.
2
Delete the message	Press during playback to delete current
3	message. Press 3 twice to delete all old
33	messages.
Repeat or go back	Press during the caller’s message to
4	repeat the message. Press during the
	beginning of the day and time announce-

ment to go back to the previous caller’s message.

NOTE: If you pause for more than 10 seconds dur-

ing remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically.

Stop	Press to stop any operation (stop play-
5	back, stop recording).
Skip to next message	Press to skip current message and
6	advance to next message.
Review announcement	Press to review current outgoing
#7	announcement.
Record announcement	Press * 7, wait for beep, then begin
*7to begin recording	speaking. Press 5 to stop recording and
5to stop recording	hear playback of the new announcement.
Record memo	Press 8, wait for beep, then begin speak-
8to begin recording	ing. Press 5 to stop recording.
5to stop recording
Review remote access code	Press # 9 to review remote access code.
#9
Change remote access code	Press * 9 to change remote access code,
*9	then enter desired remote access code
	from 10-99.

38