Nortel Networks FastRad manual Led

		7
TCM Port	DB-9 Pin	Barrel Power
	Connector	Supply Plug
		LED

Figure 2 – KSU connection

6.Connect one end of the RJ-11 teladapt cord to the TCM port on the side panel of the FastRAD. See Figure 2.

7.Connect the other end to the RJ-11 teladapt jack to the KSU. Make sure the cord is less than 800 m (2600 feet) long.

Note: A connection to the FastRAD DB-9 pin serial port is only required for a direct connection to a PC at the site.

FastRAD Installation Guide