Nortel Networks FastRad manual Display shows, Gen

12

2.Press CHNG to change your programming password. Using the dialpad, enter your new password. Your pass- word must be from eight to 10 characters long. As you enter your password, the display shows asterisks. The display changes to show: Confirm password. When you re-enter your password, asterisks appear on the display.

Note: We recommend you assign a password the first time you start a programming session. You must assign a pass- word before you can perform remote access. Write down your password, keep it in a safe place and avoid giving it to co-workers. This password can be changed at any time.

3.Press OK to accept your new password. The display changes to show Password again.

4.Press NEXT.

The display shows:	RAD Admin
	GEN	ALARM DATA

The RAD Admin display is the main programming display. This display must appear on the telephone before you can begin to program the FastRAD.

FastRAD Installation Guide