
8
Mounting the FastRAD
Before you mount the FastRAD, select a location within 800 m (2600 feet) of the distribution block that is free of traffic, dust and dampness.
Note: You do not need to mount the FastRAD on the wall if it is only being used temporarily to program the KSU.
The FastRAD can be mounted either horizontally or vertically. To mount the FastRAD on the wall:
1.Attach the paper mounting template to the wall. Make sure the template is even with the wall. See Figure 3.
Note: This template is found at the center of this guide.
130 mm (5.25 in) | |
130 mm (5.25 po) | 130 mm (5.25 pulg) |