Nortel Networks BCM 4.0 External, Internal and external, Incoming page during active call

Telephone features

Page	FEATURE 60 and code (1 to 3) and zone (0 to 6)
	Make a page announcement through either the internal (code 1) or
	external (code 2) speakers, or both (code 3). Zone 0 pages all zones.
	Page announcements are programmed to timeout after a pre-selected
	amount of time, which is set by your System Administrator.

Variances

* (cannot receive pages)

Internal page

FEATURE 61 and zone (0 to 6)

Make a page announcement to all, or to a specific group of telephones, through the telephone speakers. Zone 0 pages all zones.

External page

FEATURE 62

Make a page announcement through an external loudspeaker system.

Internal and external page

FEATURE 63 and zone (0 to 6)

Make a page announcement through both your telephone speakers and an external loudspeaker system. Zone 0 pages all zones.

Incoming page during active call:

The system can be set to either:

•Put an active call on hold, and broadcast the incoming page.

•Broadcast of an incoming page is muted for the duration of an active

call; broadcasting any remaining portion of the page after the call is terminated.

This feature is set by your system administrator.

Note: Business Series Terminals: a call on mute when a page is broadcast does not remain muted when it is released from hold after the page.

Pause	FEATURE 78
	Program in an external autodial sequence to insert a 1.5-second delay.
	For pulse dialing: * also inserts a 1.5-second delay.

Page 9