Bogen LUMDMU manual Connect the Mdmu to the Telephone System, Rack Mounted Mdmu

Page 6

Figure 2. Rack Mounted MDMU

2 Connect the MDMU to the Telephone System

AUX. CONNECTOR	J1		REM OPTION	BATTERY
			SWITCH	OFF ON
			SWITCH	OFF ON

MOST

TELEPHONE

SYSTEM

TIP AND RING FROM

ANALOG STATION

Figure 3 MDMU Connection to Telephone System

3

Image 6

Contents Multiple Digital Message Unit Domestic and International Approvals Table of Contents Introduction Before You StartInstallation Steps Have Required ToolsConnect the Mdmu to the Telephone System Rack Mounted MdmuMdmu Connection to Over Ride Set the Mdmu options on the DIP switch. Refer to Table belowPower Up System Push the Battery slide switch to the on positionControls and Indicators Front Panel OperationRecording Messages When recording is complete, press the Func key Listening to Recorded Messages Press the RUN button Playing MessagesPress the Func button until Play is displayed Than MSG-01 to playPress the Func button to select a message other You are configured for 8 seePlaying Messages in Sequence Press RUN to play and group the messageAdding a Time Delay Between Message Plays Clearing a Message Sequence Press RUN to clear the message sequenceChecking Message Times Press the Func button until Time appearsReset Delay Times to Default Audio and Memory TestsButton until Test appears Button to end the continuous audioTest Button to select the memory testTelephone Access Operation Playing Messages Specifications On the next page give the Aux. Connector pin-out definitionsPIN Wire Colors Definition Blue White J1 Ring Orange