BT BT Versatility manual Voicemail module, Back up Voice Module voice messages and Greetings

Page 21

BT Versatility

Installation and maintenance Manual

Voicemail module

The Voice module is coloured BLUE

It is located in the Voice Module slot in the CCU.

There are two versions. Two Port with 2 hours capacity, 4 port with 4 hour capacity and 8 port with 20 hours capacity.

A label identifies the 3 different modules. The label location is indicated in the drawing below.

Module identification label

Back up Voice Module voice messages and Greetings

The ability to back up all the voice messages and greetings recorded on the voice module is available, so that they are not lost if the system software is upgraded. Before the software download is started the voice module information is retrieved using that option in Remote Management Software.

Once this is done the voice module is effectively deactivated, therefore it is unavailable to users trying to record messages until the software download is completed and the voice module information restored back to the system.

The voice module is now re-activated and available for use and all the greetings and messages present before the software download are still present.

20

Image 21

Contents BT Versatility Contents General overview IntroductionSafety Precautions during installation and system upgrades Electrostatic precaution ESPLightning and surge voltage protection BT Versatility Pro. PlusIncludes System, VM, 1M,2V8 Maintenance items Installation checklist CCU LocationCCU Installing the Central Control UnitMounting the CCU Wall mount bracketCCU Mounting bracket clearances CCU Mounting BracketCCU Bracket + Backplane Bracket 300mm min Module location Modules located in the CCUInstalling the Backplane wall bracket System ExpansionMounting the CCU with two brackets Mounting screw hole Mounting the BackplaneExpansion Modules Push up to lock Installing an Expansion moduleAnalogue line module Installing the Analogue Module in the CCUAnalogue Module Remove the cover Locate the Module First network moduleTo Locate the Analogue Module in the Ports Module Installing the Basic Rate Isdn Module in the CCU Basic Rate Isdn expansion moduleDigital Line Module Isdn First network module Second Module. Can be external T or internal S To Locate the Digital Line Module Isdn 2 in the Ports moduleSystem Isdn settings T0 interface terminationS0 interface termination Back up Voice Module voice messages and Greetings Voicemail modulePrimary Rate Interface Availability TBC Battery charger connector on the PSU Connecting the battery backup unit to the systemLed Indicators Connecting the BatteryV16 Featurephone connections underside of phone FeaturephoneV8 Featurephone connections underside of phone Position at 35 degrees Attaching the Featurephone desk plinth V8To connect the V16 Console to a Featurephone V16 only Feature phone with consoleV16 expansion console Expansion consoleClip, Plinth and installation of the V16 expansion console Line cord rails Wall-mounting a FeaturephoneDoor Intercom Wall hook when the V8/V16 is wall mountedConnecting the extensions Cabling the unitCabling Break outs Speech Pin Data Connecting a MOH Music On Hold Module CCU connectionsDoor Intercom Doorstrike Connecting a PC or Printer to the Serial Port Connecting a PA public Address amplifierPorts Module MDF Connections MOH Module containsInternet Module MDF Connections Central Bell Options Module MDF ConnectionsExternal Extension Cable limitationsInstalling an additional Network Analogue or Isdn module Installing additional modulesExpanding an Existing system Hot Swapping faulty modules Maintenance proceduresReplacing a faulty Module MDF Replacing the 008 extension board Replacing Faulty PCBsReplacing the CCU Control PCB Power supply unit spare fuse Spare Fuse Replacing the Power Supply UnitReplacing the CCU MDF Power fail AnalogueLine position Power up and test Switch onCommissioning Programming Equipped exchange linesIncoming ringing Call Barring Internet Module Programming Installation WizardAdsl Isdn Recommendations for customer training Troubleshooting 230 ± 10% V 50 Hz Technical specificationLAN Full remote support from a BT Maintenance Centre Index Offices Worldwide