38
R&TTE
This product is intended for use within the UK for connection to the public telephone network and compatible switchboards.
This equipment complies with the essential requirements for the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC.
For your records
Date of purchase: Place of purchase: Serial number:
For guarantee purposes proof of purchase is required so please keep your receipt.
Declaration of Conformance
Hereby, CCT Marketing Ltd declares that this Graphite 2100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
If you would like a copy of the Declaration of Conformance, please visit www.bt.com/producthelp
Connecting to a switchboard
This product is intended for use within the UK for connection to the public telephone network and compatible switchboards, which support tone dialling and timed break recall. If in doubt please consult your service provider.
Inserting a pause
With some switchboards, after dialling the access code you may have to wait for a moment while the switchboard picks up an outside line so you will need to enter a pause in the dialling sequence.
Press and hold 
until P appears in the display to insert a pause (P) before entering the telephone number.
You may also need to enter a pause when storing international numbers or charge card numbers.
Recall (R)
You may need to use the recall function if you are connected to a switchboard/PBX (Private Branch Exchange), contact your PBX supplier for further information. The recall function is set to timed break recall and is also used for BT Calling Feature.
User Guide formats
This document is also available in other formats, such as Large print, Braille and Audio CD. If you would like a copy, please phone 0808 100 6556*.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp