7
For each additional handset and charger:
1. Plug the mains power adaptor (item code 052300) into the power socket on the back of the charger and secure the cable behind the retaining clip. Plug the other end into the mains power wall socket and switch the power on.
Mains power adaptor.
Cable retaining clip
2. Remove the protective film from the handset screen and activate the batteries by pulling the plastic tab away from the back of the handset.
The display will show the handset number, 2, to show it is registered to the base.
3. Place the handset on the charger. It will beep when placed in and the battery icon on the handset will flash to indicate charging. You should let the batteries charge continuously for at least 24 hours.
Any additional handsets supplied as part of a multipack are
Set the date and time
Menu | Menu |
1. Press , scroll Calls to CLOCK/ALARM and press .
Menu
2. DATE/TIME is displayed. Press .
3. Use the keypad to enter the date in the format (DD/MM/YY),
e.g. 12/08/10 for 12th August 2010. If you make a mistake press Secrecy to delete.
Menu
4. Press . Use the keypad to enter the time in the 24 hour format (HH:MM), e.g, 17:25 for 5.25pm.
Menu
5. Press to confirm.
Your BT Graphite 2100 is now ready for use.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp