Call Waiting
Call Waiting lets you know if an incoming call arrives while you are already on the phone. You will hear a soft beep every 5 seconds (the beep is not audible to the person you are speaking to) and the second caller’s details will be shown on the handset display.
You can put the current call on hold and speak to the second caller, or reject the second call.
If you have more than one handset, the other handsets will ring unless the maximum number of calls is already in progress.
Call Waiting is set automatically, you can turn this feature off by using #43#. When you turn Call Waiting off you will hear a beep.
To switch between the current and waiting callers
1Press Switch to answer the waiting call and put your current caller on hold. Press Switch or the R (Recall) button again to toggle between the two calls.
To end the current call when switching between callers,
press . Then press Yes to reconnect to the other caller or No to end the other call.
If you do not press any button for 30 seconds, the waiting call is routed to all handsets registered to the BT Hub 2.0.
To end the current call and speak to the waiting caller
1When you get a call waiting, press to end the current call.
2When your handset rings with the second call, press
. The second caller is only charged from the second you answer, not while they are waiting to be connected.
46