To set to Earth Recall with Tone dialling
. DEF MNO
INT SET # 1 ➞➞ 0 3 6
•Press the INT button.
•Press the SET button
•Press the # button.
•Press the 1 button.
•Enter the system code (default = 0000).
•Press the REDIAL button.
•Press the buttons 0, 3, 6.
•Press the SET button.
To insert an access code
The handset must be switched ON.
.
INT SET # 0 ➞➞
•Press the INT button.
•Press the SET button
•Press the # button.
•Press the 0 button.
•Enter the system code
(default = 0000). Each digit you enter erases one dash on the display.
•Press the REDIAL button. Display shows
•Enter the access code (for example 9). If you want to enter additional access codes, press REDIAL again, followed by the next code, and so on.
•Press the SET button to confirm.
Notes
•You can store RCL, ✱, and # as well as the digit keys
•You can enter up to three switchboard access codes, each one to three digits long.
•You may find it useful to enter 144 (for BT Chargecard access) as one of the access codes, together with an access pause of six seconds
– see ‘Setting the access pause’ opposite.
Setting the access pause
You can insert a pause or change the length of a pause to suit different access codes.
Code | PAUSE |
0 2 4 | 1 second |
0 2 5 | 2 second |
0 2 0 | 3 second |
0 2 1 | 6 second |
2 5 3 | To clear all |
access codes
The handset must be switched ON.
INT SET # 1 ➞➞
•Press the INT button.
•Press the SET button
•Press #.
•Press the 1 button
•Enter the system code
(default = 0000). Each digit you enter erases one dash on the display.
•Press the REDIAL button.
•Enter one of the
•Press the SET button to confirm.
If you are experiencing problems, please call the Diverse Helpline on 0845 790 8070.
34