Switchboard compatibility
Your Diverse 2011 can be connected to all compatible switchboards. For a list of suitable switchboards, phone Diverse Helpline on 0845 790 8070 or BT on 154.
Entering external access codes for older switchboards.
When you use your telephone on a switchboard you may need to program a delay after you have dialled the access code. This enables the switchboard to pick up an external line. By storing the access code your switchboard uses, for example ‘9’, you can set this delay to be inserted automatically. You will still need to dial the access code each time before calling any telephone number you want.
Setting the TONE or PULSE mode
Your Diverse 2011 is preset to TONE dialling – where you hear a tone beep
To set PULSE dialling
. DEF DEF
INT SET # 1 ➞➞ 0 3 3
•Press the INT button.
•Press the SET button
•Press the # button.
•Press the 1 button.
•Enter the system code
(default = 0000). Each digit you enter erases one dash on the display.
•Press the REDIAL button.
•Press the buttons 0, 3, 3.
•Press the SET button to set pulse dialling.
To
. DEF PQRS
INT SET # 1 ➞➞ 0 3 7
•Press the INT button.
•Press the SET button
•Press the # button.
•Press the 1 button.
•Enter the system code (default = 0000).
•Press the REDIAL button.
•Press the buttons 0, 3, 7.
•Press the SET button to set tone dialling.
To set Time Break Recall with Tone
each time you dial a number. Tone dialling is suitable for all modern digital exchanges and switchboards. So you will only need to use this if your switchboard uses pulse dialling. If you cannot make a call with TONE dialling, you may need to switch to PULSE dialling.
dialling
.
INT SET # 1 ➞➞ 0
•Press the INT button.
•Press the SET button
•Press the # button.
•Press the 1 button.
•Enter the system code (default = 0000).
•Press the REDIAL button.
•Press the buttons 0, 3, 7.
•Press the SET button.
DEF PQRS
3 7
33